Terms and Conditions

   WARNING! THIS IS IN DRAFT STATE

HackRVA Terms and Conditions

Membership

Becoming a Member

• Contact a hackrva leader at infoAThackrva.org to become a member or come to an openhouse.
• The Membership Levels describes the different kinds of membership.
• See us on a Thursday Night Open House or email us at [email protected] to get your monthly billing set up.
• By setting up your billing, you are agreeing to abide by the Terms and Conditions outlined in this document

Being an Active Member

• Paying dues makes someone a member of hackrva.
• The stopping of paying dues
• We ask that members contribute to the hackrva community in one or more ways as possible.

Ways to Contribute

• Volunteer by asking another member what opprotunities are currently available or emailing hackrvaATinfo.com.
• Ask to teach a worshop by using our Meetup.com page
• Visit the New Members area.
• Participate on a HackRVA group project.
• Bring your own project in and talk about it.
• Show up and help out on any of the special nights or events.
• Help work the HackRVA table at an event.
• Just show up and talk!

Billing

• All members are billed on the first business day of the month using the credit card they have on file.
• All billing is handled via credit/debit card through Intuit Merchant Account Services

• We don't use cash billing. Any cash given to us will be happily accepted as a donation, but we only take cards for membership. We know this may not be ideal for some people but in order to stay solvent we've found recurring billing by card is the best way.

Changing Membership Level

• Membership levels are defined here
• Email us at [email protected] at least 2 weeks prior to the next billing date
• Please try and keep this limited to 1-2 times per year.

Cancelling Membership

• Notify us by email at [email protected] with 2 weeks prior notice to the next billing date
• Notification is considered an email with a confirmed reply.
• Remember that we are all keeping the makerspace alive and thriving in our spare time. We're volunteers instead of a business so please keep that in mind.

Makerspace Guidelines

Security

Doors

• Be sure to lock the door if you are the last member to leave
• Do not make copies of hackrva keys

Personal Belongings

• Personal belongings/equipment are left at your own risk.

Non-Members and Guests in the Makerspace

• Don't bring anyone into the makerspace that you don't wholly trust

Housekeeping

• All tools and supplies should be returned to where they belong after they are used
• Turn off lights when you leave
• Do not leave small electronics on, especially things like soldering irons, etc.
• Take out the trash and recycling when it is full
• Clean up after yourself.
• Anything not in your storage box may be mistaken as donations. Larger projects and items should be labeled with your name to avoid confusion.
• Larger projects and items should not be left at the space for than 2 days without consent from hackrva leadership - infoAThackrva.org
• Thumbs Up/Down rule on loud music and video
• Do not make changes or modifications to the building or facilities without clearing it with hackrva leadership. This includes making holes in the walls larger than a screw hole.
• Do not remove equipment from the space. Some smaller tools (owned by hackrva soley) may be allowed with permission from hackrva leadership
• If a tool is broken or working improperly, contact the HackRATs so they can asses repairs needed.

Damages

• A member is responsible for any damage done to the space, equipment or other people's belongings done by them or their guests.

Consumable Supplies

• We have a small budget to provide consumables to the space. But we greatly rely on member donations, so if you have extra of something please consider donating. You can donate freely or if you'd like a receipt, go here.
• Screws, Nails, Bolts are welcome
• 3D Printer Stock (especially if you plan to use a lot - it may be best to keep your own roll)
• Stock pieces (wood, metal, plastic, etc.)

Events, Workshops, Meetings

• Events, workshops, or meetings can be scheduled by contacting hackrva leadership at hackrvaATinfo.com or contacting same on Meetup.com
• The hackrva schedule is publicly available for all to know at http://www.hackrva.org/blog/calendar/
• It is the members responsibility to be aware of the calendar.
• Free-hack days have been established so that no events are allowed on those days in order to balance the needs of events, workshops, and meetings against individual members who need times to work with out restriction. check the calendar for Free-hack days.
• Use of the any part or all of the space may be restricted because of an event, workshop, or meetings. This is at the discretion of the organizer.
• Disruption of events, workshops, or meetings should be avoided. The organizer will decide what is disruptive and if that activity should stop.
• If you're hosting something, please clean up any mess you make in the Meeting Room
• If you leave something, the people who clean up after you reserve the right to claim and/or trash anything you leave

Guests

• Guests are allowed
• Members are responsible for their guests
• Guests are not entitled to storage or access to equipment
• Guests should be supervised at all times
• Guests that cause disruption can be asked to leave at anytime
• Guests are discouraged during schedule events and workshops unless they are there to participate in that specific event or workshop

Minors

HackRVA Policy on Minors

Kids are awesome! HackRVA sponsors many special events that focus on learning for a younger age group, such as Maker Camp and Maker Guild. We also realize the need for safety and clear guidelines regarding minors. We've created this policy to make HackRVA a stronger organization that caters to a diverse set of needs while keeping in mind the limitations of our organization.

Our age guidelines are as follows:

• Saturdays are typically adults only. The exception being a minor focused event held on Saturday, which would be in the description on the calender/meetup page.

• Members should have no more than 2 minors with them at any time unless it is a minor designated event.

• There should be no more than 5 minors at the space at a time unless it is a minor designated event.

• 0-5 years old - Wait until they're older to bring them to the space.

• 6-12 - Welcomed at special "kid-friendly" events only. Must be accompanied by a guardian at those events. The fab-lab is restricted for this age group.

• 13-14 - Welcome to the space anytime with direct adult supervision(except Saturdays). The fab-lab is restricted for this age group.

• 15-17 - Welcome to the space anytime with direct adult supervision(except Saturdays). The fab-lab is available on a case by case basis with proper training and consistent guardian supervision.

We've also created a guide for young makers in Richmond, see here: Young Makers.

       Kid-Friendly Events       General Use          Fablab         Saturdays
         (makerguild)           (w/ Guardian)     (aka ToolRoom)    (hackathons)
        (LEGO leuge, etc)     (except Saturdays)    (aka Shop)      
 AGE 
  0-5      NO                       NO                  NO              NO  
 6-12      YES                      NO                  NO              NO
13-14      YES                      YES                 NO              NO
15-17      YES                      YES            case-by-case         NO

Donating

Card & PayPal

We accept donations by credit/debit card or PayPal via a donation button on our website that links to here. All donations will be receipted within thirty days by email. For complete details on our donating process through School Factory go here.

Check

We accept donations by check in person and process them through our partner School Factory. All donations will be receipted within thirty days by email. For complete details on our donating process through School Factory go here.

Tools, Materials, In-Kind

If your donating tools, materials, or other in-kind objects you don't have to do it officially, but if you'd like a receipt for your records please email a HackRVA managing member at [email protected] or in person. They will take the donation and do the processing. All donations will be receipted within thirty days by email. For complete details on our donating process through School Factory go here.

Junk Donations

Please be mindful of donating things larger than say a toaster or a laptop without confirmation. Donations should *usually* go to the back of the Tech Room (tall white room with soldering equipment) in the donation area. And if there's not room there, organize that area to make room or take the donation back home. Our space is small and has a tendency to get inundated with people's well intentioned but often not needed donations.

Things we generally don't need:

• CRT Monitors
• TV's
• Speakers
• Home entertainment equipment (think VCR's)
• Broken shop equipment
• Broken desktop computers (esp carcasses)
• Really old-azz computers
• Computer printers
• out-of-date computer cords (USB and HDMI we do need)
• couches or other furniture

There's exceptions to all these, though typically we don't need too much of the things listed above (unless you know it has a specific purpose, need, or is going to be hacking in not-too-short a time).

If you have a doubt, you can ask [email protected]. And, if you coordinate a drop-off/pick-up exchange on the mailing list, please follow-up on it.

If anyone ever wants to volunteer on the donation management, sign up here.

We always need more volunteers to keep the space orderly.

Safety

• If you need training, ask a person in the space or contact the HackRAT's and we'll coordinate a training opportunity.
• Common Sense rules the day at the makerspace.
• Please do not run with scissors, stick things in electrical sockets, or endanger anyone at any time

Proper Ventilation

• Please ensure you have proper ventilation when your project needs it. Work outside if fumes are dangerous.
• Filling the makerspace with fumes and smoke will not earn you friends or cool points.

First Aid

• There is a first aid kit in the makerspace for use when needed

Fire Extinguishers

• There are multiple fire extinguishers in the makerspace
• Please be familiar with their locations for use when needed

Damages

• Members are responsible for their guest's damages as well as their own.

Alcohol

In the Makerspace

• We know many of us enjoy a cold beer while hanging out. That's fine.
• HackRVA doesn't (typically) pay for the beer.

Intoxication

• Members reserve the right to ask anyone to leave who is intoxicated, high, or not in a fit state to be around heavy machinery.