Thunder Laser
Thunder Laser
Thunder laser - Nova 35 from ThunderLaser.com
900mm x 600mm x 230mm (35.4” x 23.6”x 9.1”) 100 Watts of Power
Cuts up to 1/2 inch material Materials which can be cut include:
- Plywood
- Acrylic
- Paper, card stock, and poster board
- Vegetable tanned leather
- Craft foam
All of those can also be etched, meaning an image is burned into the surface. Other materials can be etched, like glass, ceramics, or paint.
Materials which can not be cut include Vinyl (including fake leather, Naugahyde, "Moleskin" notebooks, etc.), Poly-carbonate, Metal (It can burn off the protective paint, but the metal will not be affected.), Latex
Access and Training
Access to the Laser Cutter requires training from a qualified member.
- Read the HackRVA Laser Training.
- Watch the Training Video Playlist.
- Schedule a certification with a trainer by asking on the laserrats channel on Slack.
Helpful Links
Thunder Laser video tutorials:
http://www.thunderlaser.com/video
More Thunder Laser information:
Thunder Laser Knowledge-Base
Lightburn documentation:
https://github.com/LightBurnSoftware/Documentation/blob/master/README.md
Lightburn video tutorials:
https://lightburnsoftware.com/pages/tutorials
A 30 day trial is available at
lightburnsoftware.com
Advanced Techniques (ie comparing changing one variable, like Interval or Focus link):
www.thunderlaser.com/video/advanced-tutorial.html
Vector Graphics: en.wikipedia.org/wiki/Vector_graphics
Image Formats: en.wikipedia.org/wiki/Image_file_formats
Boxes - folding paper or cardboard: www.templatemaker.nl/
Gears: www.woodgears.ca
www.gearotic.com
Box finger joints: www.MakerCase.com
Boxes.py - wonderful box designs and more. Website and plugin www.festi.info/boxes.py
www.SVGNest.com - nests shapes for efficient cutting
Epiloglaser.com “Sample Club”. Lots of practice projects.
www.epiloglaser.com/resources/sample-club.htm