Thunder Laser: Difference between revisions
Kent.durvin (talk | contribs) Updated links |
Kent.durvin (talk | contribs) No edit summary |
||
| Line 39: | Line 39: | ||
*Styrene, styrofoam, foamcore (They tend to catch fire, and they also produce lots of sooty residue) | *Styrene, styrofoam, foamcore (They tend to catch fire, and they also produce lots of sooty residue) | ||
Also, some other materials produce excessive soot, smoke, or fine threads of molten plastic that can clog the exhaust system. The fan is very hard to clean. Please be aware of what your cut is producing! | Also, some other materials produce excessive soot, smoke, or fine threads of molten plastic that can clog the exhaust system. The fan is very hard (and dangerous) to clean. Please be aware of what your cut is producing! | ||
[[Media:ThunderLaserParameters.pdf|Chart of Speeds and Power]] (Starting point settings. Materials vary, and the laser may be weaker than when it was new.) | [[Media:ThunderLaserParameters.pdf|Chart of Speeds and Power]] (Starting point settings. Materials vary, and the laser may be weaker than when it was new.) | ||
| Line 81: | Line 81: | ||
[http://www.SVGNest.com www.SVGNest.com] - nests shapes for efficient cutting | [http://www.SVGNest.com www.SVGNest.com] - nests shapes for efficient cutting | ||
These are supplied at a site of a competitor to the ThunderLaser company that makes our system: | |||
Epiloglaser.com “Sample Club”. Lots of practice projects.<br/> | Epiloglaser.com “Sample Club”. Lots of practice projects.<br/> | ||
[https://www.epiloglaser.com/resources/sample-club.htm www.epiloglaser.com/resources/sample-club.htm] | [https://www.epiloglaser.com/resources/sample-club.htm www.epiloglaser.com/resources/sample-club.htm] | ||
[https://docs.google.com/document/d/1OhgI_H_MzpebNklJVHJKU3PouQFS7xFjsurPLbF5Yhg/edit HackRVA Laser Cutter Basics] | [https://docs.google.com/document/d/1OhgI_H_MzpebNklJVHJKU3PouQFS7xFjsurPLbF5Yhg/edit HackRVA Laser Cutter Basics] | ||
Revision as of 21:14, 21 May 2021
Laser Cutter
Thunder Laser
Thunder laser - Nova 35 from ThunderLaserUSA.com
Bed size: 900mm x 600mm x 230mm (35.4” x 23.6”x 9.1”)
100 Watts of Power
Cuts up to 1/2 inch material.
Materials which can be cut include:
- Plywood
- Acrylic
- Paper, card stock, and poster board
- Vegetable tanned leather
- Craft foam
All of those can also be etched, meaning an image is burned into the surface. Other materials can be etched, but not cut, like glass, ceramics, or painted metal.
Materials which can not be cut include:
- Vinyl (including fake leather, Naugahyde, "Moleskin" notebooks, etc.) Watch this to see how to test for it: https://www.youtube.com/watch?v=ZqIU8yAobkc
- Poly-carbonate (it cuts but then melts back together)
- Metal (It can burn off the protective paint or anodized color, but the metal will not be affected.)
- Latex
- Styrene, styrofoam, foamcore (They tend to catch fire, and they also produce lots of sooty residue)
Also, some other materials produce excessive soot, smoke, or fine threads of molten plastic that can clog the exhaust system. The fan is very hard (and dangerous) to clean. Please be aware of what your cut is producing!
Chart of Speeds and Power (Starting point settings. Materials vary, and the laser may be weaker than when it was new.)
Access and Training
Access to the Laser Cutter requires training from a qualified member.
- Read the HackRVA Laser Training.
- Watch the Training Video Playlist.
- Schedule a certification with a trainer by asking on the laserrats channel on Slack.
- Watch the vinyl test video.
Helpful Links
Thunder Laser video tutorials:
http://www.thunderlaser.com/video
More Thunder Laser information:
Thunder Laser Support
Lightburn documentation:
https://github.com/LightBurnSoftware/Documentation/blob/master/README.md
Lightburn video tutorials:
https://lightburnsoftware.com/pages/tutorials
A 30 day trial is available at
lightburnsoftware.com
You can buy Lightburn for your own laptop for $30 with a discount code. Ask on Slack. The price is for 1 year. After that, it still works, but it will not update as new versions are released. To set up your copy there is a folder on the desktop of the laser computer with screenshots of the device settings.
Advanced Techniques (ie comparing changing one variable, like Interval or Focus link):
www.thunderlaser.com/video/advanced-tutorial.html
Vector Graphics: en.wikipedia.org/wiki/Vector_graphics
Image Formats: en.wikipedia.org/wiki/Image_file_formats
Boxes - folding paper or cardboard: www.templatemaker.nl/
Gears:
Box finger joints: www.MakerCase.com
Boxes.py - wonderful box designs and more. Website and plugin www.festi.info/boxes.py
www.SVGNest.com - nests shapes for efficient cutting
These are supplied at a site of a competitor to the ThunderLaser company that makes our system:
Epiloglaser.com “Sample Club”. Lots of practice projects.
www.epiloglaser.com/resources/sample-club.htm