X-Carve: Difference between revisions
Jump to navigation
Jump to search
Kent.durvin (talk | contribs) (Add Easel link) |
Kent.durvin (talk | contribs) No edit summary |
||
| Line 2: | Line 2: | ||
[[Category:Equipment]] | [[Category:Equipment]] | ||
CNC Router by Inventables | CNC Router by Inventables | ||
This is a small, easier-to-use CNC router. It is run by the software Easel, also from Inventables. | This is a small, easier-to-use CNC router. It is run by the software Easel, also from Inventables. Easel requires a free account with Inventables. <br /> | ||
The router is a standard wood router. Several kinds of bit are provided. Materials to be cut should be wood.<br /> | |||
A vacuum is wired into the switch that controls the router. Without the vacuum, large amounts of fine dust are generated. <br/> | |||
The bed is a board with a grid of threaded holes. Hold down devices are attached to the bed with thumb screws. All of thes are in small bins along the front of the bed. A waste board must always be used when cutting to prevent damage to the bed.<br /> | |||
[[File:Xcarve.png]] | [[File:Xcarve.png]] | ||
Latest revision as of 00:03, 30 December 2019
CNC Router by Inventables
This is a small, easier-to-use CNC router. It is run by the software Easel, also from Inventables. Easel requires a free account with Inventables.
The router is a standard wood router. Several kinds of bit are provided. Materials to be cut should be wood.
A vacuum is wired into the switch that controls the router. Without the vacuum, large amounts of fine dust are generated.
The bed is a board with a grid of threaded holes. Hold down devices are attached to the bed with thumb screws. All of thes are in small bins along the front of the bed. A waste board must always be used when cutting to prevent damage to the bed.
