Primary IT Infrastructure

From HackRVA
Jump to navigation Jump to search

Please check back with this page, as we are in the process of populating good information, relating to how to get the most out of your HackRVA data experience.


The primary network architecture

At Hackrva we utilize a switched network with vlans and VoIP support. We have a dedicated smart-switch, a router and a Virtulization Server which runs our web services, and groupware.

Network Devices

The HackRVA Labs, Inc. network is comprised of four primary network infrastructure devices.

  • SMC Cable Modem/gateway
  • Cisco RV180 VPN Router
  • Ubiquiti Wireless AP with PoE adaptor
  • NetGear 24-port smart-switch

Network Topology

VLANs

At HackRVA Labs, Inc. we have a segmented network using vlans for segregation of traffic.

  • VLAN-1 is the management network, and houses the management end-points for primary services.
  • VLAN-100 is the voip vlan, specifically intended to have all voip traffic.
  • VLAN-200 is the vlan for hackrva-wireless, and is the vlan which you will be assigned to, if access the hackrva-wireless ssid.
  • VLAN-300 is the vlan for all wired network infrastructure, and is also the vlan for network services such as email, and dns, as well as network printers.

Subnets (IPv4)

At HackRVA Labs, Inc. we have subneting that is assigned to specific vlans.

  • VLAN-1 is on subnet 192.168.10.0/24
  • VLAN-100 is on subnet 192.168.100.0/24
  • VLAN-200 is on subnet 192.168.200.0/24
  • VLAN-300 is on subnet 192.168.30.0/24

IPv6 addresing

HackRVA Labs, Inc. does not currently utilize IPv6 address space.

Servers

Enclosures