Metal Machining: Difference between revisions
(Created page with "The Hack.rva hackerspace has a mini [https://en.wikipedia.org/wiki/Milling_(machining) milling machine] and mini [https://en.wikipedia.org/wiki/Metal_lathe lathe] for milling...") |
No edit summary |
||
| Line 3: | Line 3: | ||
== Sieg SX2L Mini Mill == | == Sieg SX2L Mini Mill == | ||
Our milling machine is manufactured by [http://www.siegind.com/product_detail/sx2l-mini-mill-drill-15008869908466863.html Sieg Industrial Group] | Our milling machine is manufactured by [http://www.siegind.com/product_detail/sx2l-mini-mill-drill-15008869908466863.html Sieg Industrial Group]. It was sold in the United States by [https://littlemachineshop.com/ LittleMachineShop.com]. | ||
The dials on our milling machine are in metric. One rotation of the hand wheels moves the appropriate axis 1.5 mm. With 75 dial divisions this means each dial division is 0.02 mm. | |||
Our milling machine has an R8 taper. A flat-faced 3/4" collet is available, allowing the use of [https://www.tormach.com/product_tts.html the Tormach TTS tool system]. We strongly suggest you purchase your own TTS chucks and maintain your own tools. ER32 collet chucks cover a relatively large range, are nearly universal and can be had [https://is.gd/IRvAWR on Ebay] inexpensively. ER16 collet chucks more closely match the power capability of the machine. They can similarly be found [https://is.gd/LcWVMh on Ebay] inexpensively. While the chucks themselves aren't much less expensive, the appropriately sized collets are. | |||
== Sieg SC3 Mini Lathe == | == Sieg SC3 Mini Lathe == | ||
http://www.siegind.com/product_detail/sc2-mini-lathe-15008601238810425.html | Our lathe is manufactured by [http://www.siegind.com/product_detail/sc2-mini-lathe-15008601238810425.html Sieg Industrial Group]. It was sold in the United States by [https://www.micromark.com/MicroLux-7x16-Mini-Lathe MicroMark]. | ||
Our lathe has a 75 mm spindle face and Morse Taper 3 spindle taper with a 20 mm through hole. We have a 3 jaw chuck, a 4 jaw chuck, and an ER32 collet chuck. Other chucks and adapter plates are available from [https://littlemachineshop.com/products/products.php?category=566826475 LittleMachineShop.com]. | |||
The dials on the lathe are in metric. The cross-slide moves 1 mm for every full rotation of the hand wheel. With 50 dial divisions, this means that each division is 0.02 mm of radial distance from the center of the spindle. When removing material it is often useful to be thinking in terms of diameters rather than radiuses; the lathe is therefore marked 0.04 mm of diameter per dial division. | |||
The lathe is equipped with a [https://littlemachineshop.com/products/product_view.php?ProductID=3112&category= Tormach 0XA quick change tool post]. This allows the removal and installation of cutting tools without changing the height of the tool with respect to the centerline of the spindle axis. These tool holders are available inexpensively [https://littlemachineshop.com/products/product_category.php?category=1005208204 from LittleMachineShop.com] and also [https://amzn.com/B01N6BABTD on Amazon], [https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=30705&portrelay=1 from Tormach], [https://is.gd/9jLuRd from HHIP], and a lot of other vendors. You're looking for 0XA-series tool holders. | |||
These tool holders are appropriate for 6 mm and 8 mm tools or 1/4" and 3/8" tools. These are available [https://www.harborfreight.com/5-piece-indexable-carbide-tool-set-39931.html from Harbor Freight], [https://littlemachineshop.com/products/product_view.php?ProductID=1669&category=1208242246 from LittleMachineShop.com], and many other vendors. While Carbide tooling may seem appealing, this lathe is in a power range to make best use of high speed steel. [http://www.arwarnerco.com/ AR Warner] is a manufacturer of HSS inserts for lathe tooling. [https://littlemachineshop.com/products/product_category.php?category=1208242246&First=T&Last=T LittleMachineShop.com is an AR Warner vendor]. | |||
Revision as of 10:49, 3 June 2018
The Hack.rva hackerspace has a mini milling machine and mini lathe for milling and turning metal, plastic, and wood. These tools require training to operate.
Sieg SX2L Mini Mill
Our milling machine is manufactured by Sieg Industrial Group. It was sold in the United States by LittleMachineShop.com.
The dials on our milling machine are in metric. One rotation of the hand wheels moves the appropriate axis 1.5 mm. With 75 dial divisions this means each dial division is 0.02 mm.
Our milling machine has an R8 taper. A flat-faced 3/4" collet is available, allowing the use of the Tormach TTS tool system. We strongly suggest you purchase your own TTS chucks and maintain your own tools. ER32 collet chucks cover a relatively large range, are nearly universal and can be had on Ebay inexpensively. ER16 collet chucks more closely match the power capability of the machine. They can similarly be found on Ebay inexpensively. While the chucks themselves aren't much less expensive, the appropriately sized collets are.
Sieg SC3 Mini Lathe
Our lathe is manufactured by Sieg Industrial Group. It was sold in the United States by MicroMark.
Our lathe has a 75 mm spindle face and Morse Taper 3 spindle taper with a 20 mm through hole. We have a 3 jaw chuck, a 4 jaw chuck, and an ER32 collet chuck. Other chucks and adapter plates are available from LittleMachineShop.com.
The dials on the lathe are in metric. The cross-slide moves 1 mm for every full rotation of the hand wheel. With 50 dial divisions, this means that each division is 0.02 mm of radial distance from the center of the spindle. When removing material it is often useful to be thinking in terms of diameters rather than radiuses; the lathe is therefore marked 0.04 mm of diameter per dial division.
The lathe is equipped with a Tormach 0XA quick change tool post. This allows the removal and installation of cutting tools without changing the height of the tool with respect to the centerline of the spindle axis. These tool holders are available inexpensively from LittleMachineShop.com and also on Amazon, from Tormach, from HHIP, and a lot of other vendors. You're looking for 0XA-series tool holders.
These tool holders are appropriate for 6 mm and 8 mm tools or 1/4" and 3/8" tools. These are available from Harbor Freight, from LittleMachineShop.com, and many other vendors. While Carbide tooling may seem appealing, this lathe is in a power range to make best use of high speed steel. AR Warner is a manufacturer of HSS inserts for lathe tooling. LittleMachineShop.com is an AR Warner vendor.