Filament
Jump to navigation
Jump to search
hackRVA has a collection of filaments from multiple vendors for our members.
Every spool of filament has a makerspace standardized label on it with details to aid in printing. At minimum these details are manufacturer, type, size, color, minimum and maximum print temp and minimum and maximum bed temp if required. If there are any special printing instructions those are also included.| Manufacturer | Type | Size | Color | Weight | Minimum Temp | Maximum Temperature | Minimum Bed Temp | Maximum Bed Temp | No Heat-OK | Nozzle Temp | URL | Instructions |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Print Heads | 1 | 2 | 1 | 1 | ||||||||
| Build Platform Envelope | 250 x 210 x 200 mm | 215 x 215 x 200 mm Single / 197 x 215 x 200 mm Dual | 120 x 120 x 120 mm | 165 x 124 x 124 mm | ||||||||
| Heated Build Platform | Yes | Yes (20 ˚C to 100 ˚C) | Yes (Nominally 50 ºC) | no | ||||||||
| Filament Normally Loaded | 1.75 mm ABS or PLA | 3mm PLA | 1.75 mm ABS or PLA | Photopolymer Resin | ||||||||
| Nozzle Diameter | 0.40mm | 0.40 mm, 0.80 mm | 0.40 mm | 405 nm | ||||||||
| Nominal Print Speed | Coming Soon! | 30 to 300 mm/s | 10-100 cm3/hr | 1-3 cm/hour Z Axis | ||||||||
| Typical Print Layer Thickness | Coming Soon! | Coming Soon! | 0.20 - 0.35 mm | 25 - 100 μm | ||||||||
| Printing Temperature | Coming Soon! | 180 ˚C to 280 ˚C | 260-270 ºC ABS or 200 ºC PLA | 15 ˚C to 30 ˚C | ||||||||
| Web Site | Prusa | Ultimaker | UP 3D USA | Form Labs | ||||||||
| User Manual | Manual | Manual | Manual | Manual | ||||||||
| Hack.RVA Wiki | Write Me! | Ultimaker 3 | UP Mini | Form 1+ | ||||||||
| Firmware Version | 3.0.12 | 3.7.7.20170627 | V3.0.6 | N/A | ||||||||
| Serial No. | CZPX2817X003XK26782 | BPP-003840-027155 | 74314 | Sassy Leveret | ||||||||
| Software | Cura | Cura | UP Studio | Pre Form |