3D Printing: Difference between revisions
Jump to navigation
Jump to search
Kent.durvin (talk | contribs) No edit summary |
Kent.durvin (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
The hackRVA makerspace has five 3D printers in residence: a Prusa i3 MK2, an [[Ultimaker 3]], an UP Mini, a da Vinci Pro, and a Form 1+. Form1+ is a different type of 3d printer: It uses a liquid photopolymer that is selectively hardened by a UV laser on the bottom of a clear tank. It is capable of much higher resolution. | The hackRVA makerspace has five 3D printers in residence: a Prusa i3 MK2, an [[Ultimaker 3]], an UP Mini, a da Vinci Pro, and a Form 1+. Form1+ is a different type of 3d printer: It uses a liquid photopolymer that is selectively hardened by a UV laser on the bottom of a clear tank. It is capable of much higher resolution. | ||
The makerspace has a wide selection of [https://wiki.hackrva.org/index.php/filament filament.] | The makerspace has a wide selection of [https://wiki.hackrva.org/index.php/filament filament.] We try to keep some generic filament loaded for your occasional use. If you want something special, you can bring your own and load it. | ||
Here’s a short comparison of the four printers: | Here’s a short comparison of the four printers: | ||
| Line 12: | Line 12: | ||
| align="left" | Number of Print Heads ||1|| 2 || 1 || 1 || 2 | | align="left" | Number of Print Heads ||1|| 2 || 1 || 1 || 2 | ||
|- | |- | ||
| align="left" | Build Platform Envelope ||250 x 210 x 200 mm ||215X215X200mm Single/197X215X200mm Dual|| 120 x 120 x 120 mm || 165 x 124 x 124 mm || | | align="left" | Build Platform Envelope ||250 x 210 x 200 mm ||215X215X200mm Single/197X215X200mm Dual|| 120 x 120 x 120 mm || 165 x 124 x 124 mm || 200 X 200 X 200mm | ||
|- | |- | ||
| align="left" | Heated Build Platform || Yes || Yes (20 ˚C to 100 ˚C) || Yes (Nominally 50 ºC) || no || 40~90°C / 104~194°F | | align="left" | Heated Build Platform || Yes || Yes (20 ˚C to 100 ˚C) || Yes (Nominally 50 ºC) || no || 40~90°C / 104~194°F | ||
|- | |- | ||
| align="left" | Filament Normally Loaded || 1.75mm PLA, ABS, PETG || 3mm PLA, ABS, PETG || 1.75mm PLA, ABS, PETG || Photopolymer Resin || 1.75mm PLA, ABS, PETG | | align="left" | Filament Normally Loaded || 1.75mm PLA, ABS, PETG || 3mm PLA, ABS, PETG || 1.75mm PLA, ABS, PETG || (Photopolymer Resin) || 1.75mm PLA, ABS, PETG | ||
|- | |- | ||
| align="left" | Nozzle Diameter ||0.40mm || 0.40 mm, 0.80 mm || 0.40 mm || 405 nm || 0.4 mm | | align="left" | Nozzle Diameter ||0.40mm || 0.40 mm, 0.80 mm || 0.40 mm || 405 nm || 0.4 mm | ||
Revision as of 13:10, 4 February 2021
The hackRVA makerspace has five 3D printers in residence: a Prusa i3 MK2, an Ultimaker 3, an UP Mini, a da Vinci Pro, and a Form 1+. Form1+ is a different type of 3d printer: It uses a liquid photopolymer that is selectively hardened by a UV laser on the bottom of a clear tank. It is capable of much higher resolution.
The makerspace has a wide selection of filament. We try to keep some generic filament loaded for your occasional use. If you want something special, you can bring your own and load it.
Here’s a short comparison of the four printers:
| Prusa i3 MK2S | Ultimaker 3 | UP Mini | Form 1+ | da Vinci Pro 1.0 | |
|---|---|---|---|---|---|
| Photo |  |
 |
File:UPMini.png |  |
|
| Number of Print Heads | 1 | 2 | 1 | 1 | 2 |
| Build Platform Envelope | 250 x 210 x 200 mm | 215X215X200mm Single/197X215X200mm Dual | 120 x 120 x 120 mm | 165 x 124 x 124 mm | 200 X 200 X 200mm |
| Heated Build Platform | Yes | Yes (20 ˚C to 100 ˚C) | Yes (Nominally 50 ºC) | no | 40~90°C / 104~194°F |
| Filament Normally Loaded | 1.75mm PLA, ABS, PETG | 3mm PLA, ABS, PETG | 1.75mm PLA, ABS, PETG | (Photopolymer Resin) | 1.75mm PLA, ABS, PETG |
| Nozzle Diameter | 0.40mm | 0.40 mm, 0.80 mm | 0.40 mm | 405 nm | 0.4 mm |
| Nominal Print Speed | Coming Soon! | 30 to 300 mm/s | 10-100 cm3/hr | 1-3 cm/hour Z Axis | (Not specified) |
| Typical Print Layer Thickness | Coming Soon! | Coming Soon! | 0.20 - 0.35 mm | 25 - 100 μm | 20 - 400 microns |
| Printing Temperature | Coming Soon! | 180 ˚C to 280 ˚C | 260-270 ºC ABS or 200 ºC PLA | 15 ˚C to 30 ˚C | Max. 240 °C / 464 °F |
| Web Site | Prusa | Ultimaker | UP 3D USA | Form Labs | XYZ |
| User Manual | Manual | Manual | Manual | Manual | Manual |
| Hack.RVA Wiki | Write Me! | Ultimaker 3 | UP Mini | Form 1+ | None yet |
| Firmware Version | 3.0.12 | 3.7.7.20170627 | V3.0.6 | N/A | ? |
| Serial No. | CZPX2817X003XK26782 | BPP-003840-027155 | 74314 | Sassy Leveret | 3f1aw-pus5-th-644-t247 |
| Software | Cura | Cura | UP Studio | Pre Form | XYZMaker Suite or Cura |
