3D Printing: Difference between revisions
Jump to navigation
Jump to search
Matt5sean3 (talk | contribs) (BFB-3000 is long dead) |
Matt5sean3 (talk | contribs) (All hail the UP Mini) |
||
| Line 6: | Line 6: | ||
! !! Replicator !! Thingomatic | ! !! Replicator !! Thingomatic | ||
|- | |- | ||
| align="left" | Photo || [[File:Replicator.png]] || [[File: | | align="left" | Photo || [[File:Replicator.png]] || [[File:UPMini.png]] | ||
|- | |- | ||
| align="left" | Number of Print Heads || 1 || 1 | | align="left" | Number of Print Heads || 1 || 1 | ||
|- | |- | ||
| align="left" | Build Platform Envelope || 225 x 145 x 150 mm || | | align="left" | Build Platform Envelope || 225 x 145 x 150 mm || 120 x 120 x 120 mm | ||
|- | |- | ||
| align="left" | Heated Build Platform || Yes (Nominally 110 ºC) || Yes (Nominally | | align="left" | Heated Build Platform || Yes (Nominally 110 ºC) || Yes (Nominally 50 ºC) | ||
|- | |- | ||
| align="left" | Filament Normally Loaded || 1.75 mm ABS || | | align="left" | Filament Normally Loaded || 1.75 mm ABS || 1.75 mm ABS or PLA | ||
|- | |- | ||
| align="left" | Nozzle Diameter || 0.4 mm || 0.4 mm | | align="left" | Nozzle Diameter || 0.4 mm || 0.4 mm | ||
|- | |- | ||
| align="left" | Nominal Print Speed || 80 mm/s || | | align="left" | Nominal Print Speed || 80 mm/s || 10-100 cm<sup>3</sup>/hr | ||
|- | |- | ||
| align="left" | Typical Print Layer Thickness || 0.2 – 0.3 mm || 0. | | align="left" | Typical Print Layer Thickness || 0.2 – 0.3 mm || 0.20 - 0.35 mm | ||
|- | |- | ||
| align="left" | Printing Temperature || 230 ºC (ABS) || | | align="left" | Printing Temperature || 230 ºC (ABS) || 260-270 ºC ABS or 200 ºC PLA | ||
|- | |- | ||
| align="left" | Web Site || [http://store.makerbot.com/replicator.html Makerbot] || [http://www. | | align="left" | Web Site || [http://store.makerbot.com/replicator.html Makerbot] || [http://www.up3dusa.com/#!up-mini/c12oh UP 3D USA] | ||
|- | |- | ||
| align="left" | User Manual || [http://www.makerbot.com/support/replicator/documentation/fre/ Guide to Your First Print] || [http:// | | align="left" | User Manual || [http://www.makerbot.com/support/replicator/documentation/fre/ Guide to Your First Print] || [http://3dprintingsystems.com/UP%20Mini%203D%20Printer%20Manual.pdf Manual] | ||
|- | |- | ||
| align="left" | Hack.RVA Wiki || [[Makerbot Replicator]] || [[ | | align="left" | Hack.RVA Wiki || [[Makerbot Replicator]] || [[UP Mini]] | ||
|- | |- | ||
| align="left" | Firmware Version || 7.2 || | | align="left" | Firmware Version || 7.2 || V3.0.6 | ||
|- | |- | ||
| align="left" | Serial No. || 11148 || | | align="left" | Serial No. || 11148 || 74314 | ||
|} | |} | ||
Revision as of 19:53, 25 July 2016
The Hack.rva hackerspace has two 3D printers in residence: a Makerbot Replicator and an UP Mini.
Here’s a short comparison of two printers:
| Replicator | Thingomatic | |
|---|---|---|
| Photo | File:Replicator.png | File:UPMini.png |
| Number of Print Heads | 1 | 1 |
| Build Platform Envelope | 225 x 145 x 150 mm | 120 x 120 x 120 mm |
| Heated Build Platform | Yes (Nominally 110 ºC) | Yes (Nominally 50 ºC) |
| Filament Normally Loaded | 1.75 mm ABS | 1.75 mm ABS or PLA |
| Nozzle Diameter | 0.4 mm | 0.4 mm |
| Nominal Print Speed | 80 mm/s | 10-100 cm3/hr |
| Typical Print Layer Thickness | 0.2 – 0.3 mm | 0.20 - 0.35 mm |
| Printing Temperature | 230 ºC (ABS) | 260-270 ºC ABS or 200 ºC PLA |
| Web Site | Makerbot | UP 3D USA |
| User Manual | Guide to Your First Print | Manual |
| Hack.RVA Wiki | Makerbot Replicator | UP Mini |
| Firmware Version | 7.2 | V3.0.6 |
| Serial No. | 11148 | 74314 |
