3D Printing: Difference between revisions
Jump to navigation
Jump to search
Ranthalion (talk | contribs) No edit summary |
Matt5sean3 (talk | contribs) (BFB-3000 is long dead) |
||
| Line 1: | Line 1: | ||
The Hack.rva hackerspace has two 3D printers in residence: a | The Hack.rva hackerspace has two 3D printers in residence: a [[Makerbot Replicator]] and an [[UP Mini]]. | ||
Here’s a short comparison of | Here’s a short comparison of two printers: | ||
{| class="wikitable" style="text-align: center;" | {| class="wikitable" style="text-align: center;" | ||
! | ! !! Replicator !! Thingomatic | ||
|- | |- | ||
| align="left" | Photo || | | align="left" | Photo || [[File:Replicator.png]] || [[File:Thingomatic.jpg]] | ||
|- | |- | ||
| align="left" | Number of Print Heads | | align="left" | Number of Print Heads || 1 || 1 | ||
|- | |- | ||
| align="left" | Build Platform Envelope | | align="left" | Build Platform Envelope || 225 x 145 x 150 mm || 100 x 100 x 100 mm | ||
|- | |- | ||
| align="left" | Heated Build Platform | | align="left" | Heated Build Platform || Yes (Nominally 110 ºC) || Yes (Nominally 110 ºC) | ||
|- | |- | ||
| align="left" | Filament Normally Loaded | | align="left" | Filament Normally Loaded || 1.75 mm ABS || 3 mm ABS | ||
|- | |- | ||
| align="left" | Nozzle Diameter | | align="left" | Nozzle Diameter || 0.4 mm || 0.4 mm | ||
|- | |- | ||
| align="left" | Nominal Print Speed | | align="left" | Nominal Print Speed || 80 mm/s || 80 mm/s | ||
|- | |- | ||
| align="left" | Typical Print Layer Thickness | | align="left" | Typical Print Layer Thickness || 0.2 – 0.3 mm || 0.2 - 0.3 mm | ||
|- | |- | ||
| align="left" | Printing Temperature | | align="left" | Printing Temperature || 230 ºC (ABS) || 230 ºC (ABS) | ||
|- | |- | ||
| align="left" | Web Site | | align="left" | Web Site || [http://store.makerbot.com/replicator.html Makerbot] || [http://www.makerbot.com/support/thingomatic/troubleshooting Thing-O-Matic] | ||
|- | |- | ||
| align="left" | User Manual | | align="left" | User Manual || [http://www.makerbot.com/support/replicator/documentation/fre/ Guide to Your First Print] || [http://downloads.makerbot.com/support/pdf/Thing-O-Matic/Docs/Thing-O-Matic%20Usage%20Guide.pdf Usage Guide] | ||
|- | |- | ||
| align="left" | Hack.RVA Wiki | | align="left" | Hack.RVA Wiki || [[Makerbot Replicator]] || [[Makerbot Thing-O-Matic]] | ||
|- | |- | ||
| align="left" | Firmware Version | | align="left" | Firmware Version || 7.2 || Pending Sailfish | ||
|- | |- | ||
| align="left" | Serial No. | | align="left" | Serial No. || 11148 || ?? | ||
|} | |} | ||
Revision as of 19:32, 25 July 2016
The Hack.rva hackerspace has two 3D printers in residence: a Makerbot Replicator and an UP Mini.
Here’s a short comparison of two printers:
| Replicator | Thingomatic | |
|---|---|---|
| Photo | File:Replicator.png | File:Thingomatic.jpg |
| Number of Print Heads | 1 | 1 |
| Build Platform Envelope | 225 x 145 x 150 mm | 100 x 100 x 100 mm |
| Heated Build Platform | Yes (Nominally 110 ºC) | Yes (Nominally 110 ºC) |
| Filament Normally Loaded | 1.75 mm ABS | 3 mm ABS |
| Nozzle Diameter | 0.4 mm | 0.4 mm |
| Nominal Print Speed | 80 mm/s | 80 mm/s |
| Typical Print Layer Thickness | 0.2 – 0.3 mm | 0.2 - 0.3 mm |
| Printing Temperature | 230 ºC (ABS) | 230 ºC (ABS) |
| Web Site | Makerbot | Thing-O-Matic |
| User Manual | Guide to Your First Print | Usage Guide |
| Hack.RVA Wiki | Makerbot Replicator | Makerbot Thing-O-Matic |
| Firmware Version | 7.2 | Pending Sailfish |
| Serial No. | 11148 | ?? |
