3D Printing: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
HackRVA has four 3D printers in residence: a Prusa i3 MK3, Prusa i3 MK3S+, [[Ultimaker 3]] and | HackRVA has four 3D printers in residence: a Prusa i3 MK3, Prusa i3 MK3S+, [[Ultimaker 3]] and an Elegoo Mars Pro. The Elegoo Mars Pro is a resin 3d printer that uses a liquid photopolymer that is selectively hardened by a UV laser on the bottom of a clear tank. HackRVA usually has a limited selection of Jessie (preferred brand) PETG and PLA for small occasional prints. Members should provide their own filament if they are printing a large project or require a specific type. | ||
| Line 11: | Line 11: | ||
|- | |- | ||
| align="left" | | | align="left" | | ||
||[[File:Prusai3mk2s_small.jpg]] | ||[[File:Prusai3mk2s_small.jpg|x250px]] | ||
||[[File:MK3s+.png| | ||[[File:MK3s+.png|x250px]] | ||
||[[File: | ||[[File:Ultimaker3.jpg|250px]] | ||
|| [[File: | || [[File:MarsPro.jpg|250px]] | ||
|- | |- | ||
| align="left" | Number of Print Heads | | align="left" | Number of Print Heads | ||
| Line 29: | Line 29: | ||
|- | |- | ||
| align="left" | Heated Build Platform | | align="left" | Heated Build Platform | ||
|| Yes (Max 120°C) | || Yes (Max 120°C)<br> Smooth, Textured | ||
|| Yes (Max 120°C) | || Yes (Max 120°C)<br> Smooth, Textured | ||
|| Yes (20°C to 100°C) | || Yes (20°C to 100°C) <br> Glass | ||
|| | || | ||
|- | |- | ||
| align="left" | Filament Normally Loaded | | align="left" | Filament Normally Loaded | ||
| Line 50: | Line 50: | ||
|| | || | ||
|| up to 24 mmᶟ/s | || up to 24 mmᶟ/s | ||
|| | || 22.5 mm/h | ||
|- | |- | ||
| align="left" | Resolution | | align="left" | Resolution | ||
| Line 74: | Line 74: | ||
|| [https://help.prusa3d.com/tag/mk3s-2 Prusa i3 MK3S+] | || [https://help.prusa3d.com/tag/mk3s-2 Prusa i3 MK3S+] | ||
|| [https://support.ultimaker.com/hc/en-us/sections/360003548399-Ultimaker-3 Ultimaker 3] | || [https://support.ultimaker.com/hc/en-us/sections/360003548399-Ultimaker-3 Ultimaker 3] | ||
|| [https:// | || [https://www.elegoo.com/pages/3d-printing-user-support Elegoo Mars Pro] | ||
|- | |- | ||
| align="left" | User Manual | | align="left" | User Manual | ||
| Line 80: | Line 80: | ||
||[https://cdn.prusa3d.com/downloads/manual/prusa3d_manual_mk3s_en.pdf#_ga=2.26290045.1507696172.1662836540-171208064.1659213810&_gac=1.153623114.1660152978.Cj0KCQjwrs2XBhDjARIsAHVymmRPi89pkmc9nMM5Lsm4P5UC92RqI8VKnlcRAQKHZSEiXSJze8E-INcaAmmhEALw_wcB Manual] | ||[https://cdn.prusa3d.com/downloads/manual/prusa3d_manual_mk3s_en.pdf#_ga=2.26290045.1507696172.1662836540-171208064.1659213810&_gac=1.153623114.1660152978.Cj0KCQjwrs2XBhDjARIsAHVymmRPi89pkmc9nMM5Lsm4P5UC92RqI8VKnlcRAQKHZSEiXSJze8E-INcaAmmhEALw_wcB Manual] | ||
|| [https://support.ultimaker.com/hc/en-us/article_attachments/360010836740/Ultimaker_3_manual__En_.pdf Manual] | || [https://support.ultimaker.com/hc/en-us/article_attachments/360010836740/Ultimaker_3_manual__En_.pdf Manual] | ||
|| [https:// | || [https://wiki.hackrva.org/images/8/8e/Mars_Pro_Manual.pdf Manual] | ||
|- | |- | ||
| align="left" | Hack.RVA Wiki | | align="left" | Hack.RVA Wiki | ||
| Line 86: | Line 86: | ||
|| | || | ||
||[[Ultimaker 3]] | ||[[Ultimaker 3]] | ||
|| | || | ||
|- | |- | ||
| align="left" | Firmware Version | | align="left" | Firmware Version | ||
| Line 92: | Line 92: | ||
||3.11.0 | ||3.11.0 | ||
||5.3.0.0 | ||5.3.0.0 | ||
|| | || | ||
|- | |- | ||
| align="left" | Serial No. | | align="left" | Serial No. | ||
| Line 98: | Line 98: | ||
|| | || | ||
||BPP-003840-027155 | ||BPP-003840-027155 | ||
|| | || | ||
|- | |- | ||
| align="left" | Software | | align="left" | Software | ||
| Line 104: | Line 104: | ||
|| PrusaSlicer | || PrusaSlicer | ||
|| Cura | || Cura | ||
|| | || Chitubox | ||
|} | |} | ||
Revision as of 21:50, 4 March 2023
HackRVA has four 3D printers in residence: a Prusa i3 MK3, Prusa i3 MK3S+, Ultimaker 3 and an Elegoo Mars Pro. The Elegoo Mars Pro is a resin 3d printer that uses a liquid photopolymer that is selectively hardened by a UV laser on the bottom of a clear tank. HackRVA usually has a limited selection of Jessie (preferred brand) PETG and PLA for small occasional prints. Members should provide their own filament if they are printing a large project or require a specific type.
Here’s a short comparison of the four printers:
| Prusa i3 MK3 | Prusa i3 MK3S+ | Ultimaker 3 | Form 1+ | |
|---|---|---|---|---|
|
|
|
| |
| Number of Print Heads | 1 | 1 | 2 | 1 |
| Build Platform Envelope | 250 x 210 x 200 mm | 250 x 210 x 210 mm | 215 x 215 x 200 mm Single 197 x 215 x 200 mm Dual |
165 x 124 x 124 mm |
| Heated Build Platform | Yes (Max 120°C) Smooth, Textured |
Yes (Max 120°C) Smooth, Textured |
Yes (20°C to 100°C) Glass |
|
| Filament Normally Loaded | 1.75mm PLA, ABS, PETG | 1.75mm PLA, ABS, PETG | 2.85mm PLA, ABS, PETG | Photopolymer Resin |
| Nozzle Diameter | 0.40mm | 0.40mm | 0.40 mm, 0.80 mm | 405 nm |
| Build Speed | up to 15 mmᶟ/s | up to 24 mmᶟ/s | 22.5 mm/h | |
| Resolution | 50 microns | 20 microns | 25 microns | |
| Typical Print Layer Thickness | 0.05 - 0.3 mm | 0.05 - 0.35 mm | 25 - 100 μm | |
| Printing Temperature | Max 300°C | Max 300°C | 180–280°C | 18–28°C |
| Web Site | Prusa i3 MK3 | Prusa i3 MK3S+ | Ultimaker 3 | Elegoo Mars Pro |
| User Manual | Manual | Manual | Manual | Manual |
| Hack.RVA Wiki | Ultimaker 3 | |||
| Firmware Version | 3.11.0 | 3.11.0 | 5.3.0.0 | |
| Serial No. | CZPX2817X003XK26782 | BPP-003840-027155 | ||
| Software | PrusaSlicer | PrusaSlicer | Cura | Chitubox |