3D Printing: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 11: | Line 11: | ||
|- | |- | ||
| align="left" | | | align="left" | | ||
||[[File:Prusai3mk2s_small.jpg|210px]] | ||[[File:Prusai3mk2s_small.jpg|210px|link=]] | ||
||[[File:MK3s+.png|x250px]] | ||[[File:MK3s+.png|x250px|link=]] | ||
||[[File:Ultimaker3.jpg|250px]] | ||[[File:Ultimaker3.jpg|250px|link=]] | ||
||[[File:MarsPro.jpg|x250px]] | ||[[File:MarsPro.jpg|x250px|link=]] | ||
|- | |- | ||
| align="left" | Number of Print Heads | | align="left" | Number of Print Heads | ||
Revision as of 16:13, 5 May 2023
HackRVA has four 3D printers in residence: a Prusa i3 MK3, Prusa i3 MK3S+, Ultimaker 3 and an Elegoo Mars Pro. The Elegoo Mars Pro is a resin 3d printer that uses a liquid photopolymer that is selectively hardened by a UV LCD screen on the bottom of a clear tank. HackRVA usually has a limited selection of Jessie (preferred brand) PETG and PLA for small occasional prints. Members should provide their own filament if they are printing a large project or require a specific type.
Here’s a short comparison of the four printers:
| Prusa i3 MK3 | Prusa i3 MK3S+ | Ultimaker 3 | Elegoo Mars Pro | |
|---|---|---|---|---|
|
|
|
| |
| Number of Print Heads | 1 | 1 | 2 | |
| Build Volume | 250 x 210 x 200 mm | 250 x 210 x 210 mm | 215 x 215 x 200 mm Single 197 x 215 x 200 mm Dual |
120 x 60 x 155 mm |
| Heated Build Platform | Yes (Max 100°C) Smooth, Textured |
Yes (Max 120°C) Smooth, Textured |
Yes (20°C to 100°C) Glass |
|
| Filament Normally Loaded | 1.75mm PLA, ABS, PETG | 1.75mm PLA, ABS, PETG | 2.85mm PLA, ABS, PETG | Photopolymer Resin |
| Nozzle Diameter | 0.40mm | 0.40mm | 0.25mm, 0.40 mm, 0.80 mm | |
| Build Speed | up to 15 mmᶟ/s | up to 24 mmᶟ/s | 22.5 mm/h | |
| Resolution | 50 microns | 20-200 microns | 25 microns | |
| Typical Print Layer Thickness | 0.05 - 0.3 mm | 0.05 - 0.35 mm | 0.01 - 0.2 mm | |
| Printing Temperature | Max 300°C | Max 300°C | Max 280°C | |
| Web Site | Prusa i3 MK3 | Prusa i3 MK3S+ | Ultimaker 3 | Elegoo Mars Pro |
| User Manual | Manual | Manual | Manual | Manual |
| HackRVA Wiki | Ultimaker 3 | |||
| Firmware Version | 3.11.0 | 3.11.0 | 5.3.0.0 | |
| Serial No. | CZPX2817X003XK26782 | BPP-003840-027155 | ||
| Software | PrusaSlicer | PrusaSlicer | Cura | Chitubox |