3D Printing
HackRVA has several 3D printers in residence, described in the table below. In addition to traditional 3d printing, the Elegoo Mars Pro is a resin 3d printer that uses a liquid photopolymer that is selectively hardened by a UV LCD screen on the bottom of a clear tank. HackRVA usually has a limited selection of Jessie (preferred brand) PETG and PLA for small occasional prints. Members should provide their own filament if they are printing a large project or require a specific type.
| Prusa i3 MK4S (#1) | Prusa i3 MK4S (#2) | Prusa i3 MK4S (#3) | Prusa XL | Ultimaker 3 | LulzBot TAZ 6 | Elegoo Mars Pro | |
|---|---|---|---|---|---|---|---|
|
|
|
|
|
|
| |
| Number of Print Heads | 1 | 1 | 1 | 5 | 2 | 1 | |
| Build Volume | 250 x 210 x 220 mm | 250 x 210 x 220 mm | 250 x 210 x 220 mm | 360 × 360 × 360 mm | 215 x 215 x 200 mm Single 197 x 215 x 200 mm Dual |
280 x 280 x 250 mm | 120 x 60 x 155 mm |
| Heated Build Platform | Yes (Max 120°C) Smooth, Textured |
Yes (Max 120°C) Smooth, Textured |
Yes (Max 120°C) Smooth, Textured |
Yes (Max 120°C) Smooth, Textured |
Yes (Max 100°C) Glass |
Yes (Max 120°C) Glass with PEI |
|
| Filament Accepted | 1.75mm PLA, PETG | 1.75mm PLA, PETG | 1.75mm PLA, PETG | 1.75mm PLA, PETG | 2.85mm PLA, PETG | 2.85mm PLA, PETG | Photopolymer Resin |
| Nozzle Diameter | 0.40mm | 0.40mm | 0.40mm | 5 High Flow 0.40mm nozzles | 0.40 mm | 0.5mm | |
| Build Speed | up to 24 mmᶟ/s | 22.5 mm/h | |||||
| Resolution | 50 microns | 50 microns | 50 microns | 50 microns | 20-200 microns | 50 microns | 25 microns |
| Print Layer Thickness | 0.05 - 0.3 mm | 0.05 - 0.3 mm | 0.05 - 0.3 mm | 0.05 - 0.3 mm | 0.05 - 0.4 mm | 0.01 - 0.2 mm | |
| Printing Temperature | Max 290°C | Max 290°C | Max 290°C | Max 290°C | Max 280°C | Max 290°C | |
| Enclosed | Yes | No | No | Yes | No | No | Yes |
| Web Site | Prusa i3 MK4s | Prusa i3 MK4s | Prusa i3 MK4s | Prusa XL | Ultimaker 3 | LulzBot TAZ 6 | Elegoo Mars Pro |
| User Manual | Manual | Manual | Manual | Manual | Manual | Manual | Manual |
| HackRVA Wiki | Ultimaker 3 | ||||||
| Firmware Version | 6.2.4 | 6.2.4 | 6.2.4 | 6.2.4 | 5.3.0.0 | 5.3.0.0 | |
| Serial No. |
10589-37424416 00008923/44 |
10589-37424416 00008704/44 |
10381-09424416
42900724/10 |
BPP-003840-027155 | |||
| Software | PrusaSlicer | PrusaSlicer | PrusaSlicer | PrusaSlicer | Uktimaker Cura | Cura LulzBot Edition | Chitubox/ Lychee Slicer |