3D Printing

HackRVA has five 3D printers in residence: a Prusa i3 MK3, Prusa i3 MK3S+, Ultimaker 3, LulzBot TAZ 6 and an Elegoo Mars Pro. The Elegoo Mars Pro is a resin 3d printer that uses a liquid photopolymer that is selectively hardened by a UV LCD screen on the bottom of a clear tank. HackRVA usually has a limited selection of Jessie (preferred brand) PETG and PLA for small occasional prints. Members should provide their own filament if they are printing a large project or require a specific type.

	Prusa i3 MK4S	Prusa i3 MK4S	Prusa i3 MK4S	Prusa XL	Ultimaker 3	LulzBot TAZ 6	Elegoo Mars Pro
Number of Print Heads	1	1	1	5	2	1
Build Volume	250 x 210 x 220 mm	250 x 210 x 220 mm	250 x 210 x 220 mm	360 × 360 × 360 mm	215 x 215 x 200 mm Single 197 x 215 x 200 mm Dual	280 x 280 x 250 mm	120 x 60 x 155 mm
Heated Build Platform	Yes (Max 120°C) Smooth, Textured	Yes (Max 120°C) Smooth, Textured	Yes (Max 120°C) Smooth, Textured	Yes (Max 120°C) Smooth, Textured	Yes (Max 100°C) Glass	Yes (Max 120°C) Glass with PEI
Filament Accepted	1.75mm PLA, PETG	1.75mm PLA, PETG	1.75mm PLA, PETG	1.75mm PLA, PETG	2.85mm PLA, PETG	2.85mm PLA, PETG	Photopolymer Resin
Nozzle Diameter	0.40mm	0.40mm	0.40mm	5 High Flow 0.40mm nozzles	0.40 mm	0.5mm
Build Speed					up to 24 mmᶟ/s	22.5 mm/h
Resolution	50 microns	50 microns	50 microns	50 microns	20-200 microns	50 microns	25 microns
Print Layer Thickness	0.05 - 0.3 mm	0.05 - 0.3 mm	0.05 - 0.3 mm	0.05 - 0.3 mm	0.05 - 0.4 mm	0.01 - 0.2 mm
Printing Temperature	Max 290°C	Max 290°C	Max 290°C	Max 290°C	Max 280°C	Max 290°C
Web Site	Prusa i3 MK4s	Prusa i3 MK4s	Prusa i3 MK4s	Prusa XL	Ultimaker 3	LulzBot TAZ 6	Elegoo Mars Pro
User Manual	Manual	Manual	Manual	Manual	Manual	Manual	Manual
HackRVA Wiki					Ultimaker 3
Firmware Version					5.3.0.0	5.3.0.0
Serial No.					BPP-003840-027155
Software	PrusaSlicer	PrusaSlicer	PrusaSlicer	PrusaSlicer	Uktimaker Cura	Cura LulzBot Edition	Chitubox/ Lychee Slicer