3D Printing
The Hack.rva hackerspace has three 3D printers in residence: a Prusa i3 MK2 an Ultimaker 3 and an Form 1+.
Here’s a short comparison of three printers:
| Prusa i3 MK2S | Ultimaker 3 | UP Mini | Form 1+ | |
|---|---|---|---|---|
| Photo |  |
 |
File:UPMini.png | 
|
| Number of Print Heads | 1 | 2 | 1 | |
| Build Platform Envelope | 250 x 210 x 200 mm | 215 x 215 x 200 mm Single / 197 x 215 x 200 mm Dual | 120 x 120 x 120 mm | |
| Heated Build Platform | Yes | Yes (20 ˚C to 100 ˚C) | Yes (Nominally 50 ºC) | |
| Filament Normally Loaded | 1.75 mm ABS or PLA | 3mm PLA | 1.75 mm ABS or PLA | |
| Nozzle Diameter | 0.40mm | 0.40 mm, 0.80 mm | 0.40 mm | |
| Nominal Print Speed | Coming Soon! | 30 to 300 mm/s | 10-100 cm3/hr | |
| Typical Print Layer Thickness | Coming Soon! | Coming Soon! | 0.20 - 0.35 mm | |
| Printing Temperature | Coming Soon! | 180 ˚C to 280 ˚C | 260-270 ºC ABS or 200 ºC PLA | |
| Web Site | Prusa | Ultimaker | UP 3D USA | |
| User Manual | Manual | Manual | Manual | |
| Hack.RVA Wiki | Write Me! | Ultimaker 3 | UP Mini | |
| Firmware Version | 3.0.12 | 3.7.7.20170627 | V3.0.6 | |
| Serial No. | CZPX2817X003XK26782 | BPP-003840-027155 | 74314 |
