Vinyl Plotter & Cutter - Mimaki CG-130FX

From HackRVA
Revision as of 17:50, 14 June 2017 by Matt5sean3 (talk | contribs)
Jump to navigation Jump to search


Manual http://mimaki.com/archives/034/201301/CGFX_Operation_D200805_V2.0.pdf

http://mimaki.com/product/cutting/c-roll/cg-fx-series/driver.html?driver=81072


Instructions for Use

  • Plug in usb cable into PC (The 3D design station computer is right next to it)
  • Power on computer and cutter
  • Wait for cutter to load / buffer
  • Press the left arrow button to set the cutter to use
  • Press "End" when TP1 shows on the LCD panel
  • Press / hold the up/down left/right arrow keys to move origin
  • Press "Enter / HOLD" to set origin point
  • Press "Remote On" to toggle computer control of the cutter

Setting up Vinyl Master

Under tools -> Plugins and Modules -> Vinyl Spooler -> Configuration Tab

Ensure settings match this graphic:

Notes / Potential Issue

  • On boot up if you do not press left arrow when selecting vinyl roll it may spit the entire roll out
  • Auto cutting may not always work (may kick paper)
Retrieved from "https://wiki.hackrva.org/index.php?title=Vinyl_Plotter_%26_Cutter_-_Mimaki_CG-130FX&oldid=1983"