3D Printing

The Hack.rva hackerspace has three 3D printers in residence: a Prusa i3 MK2 an Ultimaker 3 and an UP Mini.

Here’s a short comparison of three printers:

	Prusa i3 MK2S	Ultimaker 3	UP Mini
Photo			File:UPMini.png
Number of Print Heads	1	2	1
Build Platform Envelope	25 x 21 x 20 cm	215 x 215 x 200 mm Single / 197 x 215 x 200 mm Dual	120 x 120 x 120 mm
Heated Build Platform	Yes	Yes (20 ˚C to 100 ˚C)	Yes (Nominally 50 ºC)
Filament Normally Loaded	1.75 mm ABS or PLA	3mm PLA	1.75 mm ABS or PLA
Nozzle Diameter	0.40mm	0.40 mm, 0.80 mm	0.4 mm
Nominal Print Speed		30 to 300 mm/s	10-100 cm³/hr
Typical Print Layer Thickness		Coming Soon!	0.20 - 0.35 mm
Printing Temperature		180 ˚C to 280 ˚C	260-270 ºC ABS or 200 ºC PLA
Web Site	Prusa	Ultimaker	UP 3D USA
User Manual	Manual	Manual	Manual
Hack.RVA Wiki	Coming Soon!	Ultimaker 3	UP Mini
Firmware Version	Coming Soon!	Coming Soon!	V3.0.6
Serial No.	Coming Soon!	Coming Soon!	74314

Navigation menu