Overhead Projector

BenQ Projector

At HackRVA Labs, Inc. we have a 1080p resolution BenQ W1200 Projector.

The rear view should be referenced for installation requirements.

Projector Usage Instructions

Using the Primary HDMI input

This information is for reference only, since the Chromecast is installed in the primary HDMI port

1. Plug the HDMI cable tagged "PROJECTOR" into the source device's HDMI output.

   The cable is on the large counter with the cabinets underneath.

2. Use BENQ white remote in plastic holder on the wall and set projector to HDMI

   Select, and depress, the button labelled "HDMI"
   

Using the Auxiliary HDMI input with cable

1. Plug the HDMI cable tagged "PROJECTOR" into the source device's HDMI output.

   The cable is on the large counter with the cabinets underneath.

2. Use BENQ white remote in plastic holder on the wall and set projector to HDMI2

   Select, and depress, the button labelled "HDMI2"

Using the SVGA input cable

1. Use the source device's VGA output to connect the cable tagged "PROJECTOR".

   The cable is on the large counter with the cabinets underneath.

2. Use BENQ white remote in plastic holder on the wall and set projector to PC

   Select, and depress, the button marked "PC"

Projector Accessories Installed

• Chromecast