Old Laser Cutter: Difference between revisions
Jump to navigation
Jump to search
Aaronn0130 (talk | contribs) initial stab at procedure |
Aaronn0130 (talk | contribs) No edit summary |
||
| Line 5: | Line 5: | ||
''How to Use the Laser'' | ''How to Use the Laser'' | ||
-Turn on computer. | -Turn on computer. | ||
-Turn on laser. | -Turn on laser. | ||
-Make sure coolant is flowing. | -Make sure coolant is flowing. | ||
-Make sure air is on. | -Make sure air is on. | ||
-Make sure all safety guidelines are followed. | -Make sure all safety guidelines are followed. | ||
wear eye protection | |||
no incorrect materials with laser (PVC) | |||
''Creating G-Code with CamBam for the laser" | ''Creating G-Code with CamBam for the laser" | ||
Revision as of 12:14, 1 February 2015
The laser cutter is in beta stage. Will be released for member use before not too long.
Here's a wiki [link to the laser cutter while it was in project phase]. If you want to know about how it was built etc, go there.
How to Use the Laser -Turn on computer.
-Turn on laser.
-Make sure coolant is flowing.
-Make sure air is on.
-Make sure all safety guidelines are followed.
wear eye protection no incorrect materials with laser (PVC)
Creating G-Code with CamBam for the laser" -set z-clearance plane to 0.001 (temp) -set depth increment to 0.001 -set final depth to 0.001 -set tool diameter to 0.001 -the rest is normal