3D Printing: Difference between revisions

Revision as of 10:53, 4 February 2021

The hackRVA makerspace has four 3D printers in residence: a Prusa i3 MK2, an Ultimaker 3, an UP Mini, and a Form 1+.

The makerspace has a wide selection of filament.

Here’s a short comparison of the four printers:

	Prusa i3 MK2S	Ultimaker 3	UP Mini	Form 1+
Photo			File:UPMini.png
Number of Print Heads	1	2	1	1
Build Platform Envelope	250 x 210 x 200 mm	215X215X200mm Single/197X215X200mm Dual	120 x 120 x 120 mm	165 x 124 x 124 mm
Heated Build Platform	Yes	Yes (20 ˚C to 100 ˚C)	Yes (Nominally 50 ºC)	no
Filament Normally Loaded	1.75 mm ABS or PLA	3mm PLA	1.75 mm ABS or PLA	Photopolymer Resin
Nozzle Diameter	0.40mm	0.40 mm, 0.80 mm	0.40 mm	405 nm
Nominal Print Speed	Coming Soon!	30 to 300 mm/s	10-100 cm³/hr	1-3 cm/hour Z Axis
Typical Print Layer Thickness	Coming Soon!	Coming Soon!	0.20 - 0.35 mm	25 - 100 μm
Printing Temperature	Coming Soon!	180 ˚C to 280 ˚C	260-270 ºC ABS or 200 ºC PLA	15 ˚C to 30 ˚C
Web Site	Prusa	Ultimaker	UP 3D USA	Form Labs
User Manual	Manual	Manual	Manual	Manual
Hack.RVA Wiki	Write Me!	Ultimaker 3	UP Mini	Form 1+
Firmware Version	3.0.12	3.7.7.20170627	V3.0.6	N/A
Serial No.	CZPX2817X003XK26782	BPP-003840-027155	74314	Sassy Leveret
Software	Cura	Cura	UP Studio	Pre Form

@@ Line 12: / Line 12: @@
 | align="left" | Number of Print Heads ||1|| 2 || 1 || 1
 |-
-| align="left" | Build Platform Envelope ||250 x 210 x 200 mm || 215 x 215 x 200 mm Single / 197 x 215 x 200 mm Dual|| 120 x 120 x 120 mm || 165 x 124 x 124 mm
+| align="left" | Build Platform Envelope ||250 x 210 x 200 mm ||215X215X200mm Single/197X215X200mm Dual|| 120 x 120 x 120 mm || 165 x 124 x 124 mm
 |-
 | align="left" | Heated Build Platform || Yes || Yes (20 ˚C to 100 ˚C) || Yes (Nominally 50 &ordm;C) || no