3D Printing: Difference between revisions

Revision as of 23:20, 21 January 2018

The Hack.rva hackerspace has three 3D printers in residence: a Prusa i3 MK2 an Ultimaker 3 and an UP Mini.

Here’s a short comparison of three printers:

	Prusa i3 MK2S	Ultimaker 3	UP Mini
Photo			File:UPMini.png
Number of Print Heads	1	2	1
Build Platform Envelope	250 x 210 x 200 mm	215 x 215 x 200 mm Single / 197 x 215 x 200 mm Dual	120 x 120 x 120 mm
Heated Build Platform	Yes	Yes (20 ˚C to 100 ˚C)	Yes (Nominally 50 ºC)
Filament Normally Loaded	1.75 mm ABS or PLA	3mm PLA	1.75 mm ABS or PLA
Nozzle Diameter	0.40mm	0.40 mm, 0.80 mm	0.40 mm
Nominal Print Speed	Coming Soon!	30 to 300 mm/s	10-100 cm³/hr
Typical Print Layer Thickness	Coming Soon!	Coming Soon!	0.20 - 0.35 mm
Printing Temperature	Coming Soon!	180 ˚C to 280 ˚C	260-270 ºC ABS or 200 ºC PLA
Web Site	Prusa	Ultimaker	UP 3D USA
User Manual	Manual	Manual	Manual
Hack.RVA Wiki	Write Me!	Ultimaker 3	UP Mini
Firmware Version	3.0.12	3.7.7.20170627	V3.0.6
Serial No.	CZPX2817X003XK26782	BPP-003840-027155	74314

@@ Line 10: / Line 10: @@
 | align="left" | Number of Print Heads ||1|| 2 || 1
 |-
-| align="left" | Build Platform Envelope ||25 x 21 x 20 cm || 215 x 215 x 200 mm Single / 197 x 215 x 200 mm Dual|| 120 x 120 x 120 mm
+| align="left" | Build Platform Envelope ||250 x 210 x 200 mm || 215 x 215 x 200 mm Single / 197 x 215 x 200 mm Dual|| 120 x 120 x 120 mm
 |-
 | align="left" | Heated Build Platform || Yes || Yes (20 ˚C to 100 ˚C) || Yes (Nominally 50 &ordm;C)
@@ Line 16: / Line 16: @@
 | align="left" | Filament Normally Loaded || 1.75 mm ABS or PLA || 3mm PLA || 1.75 mm ABS or PLA
 |-
-| align="left" | Nozzle Diameter ||0.40mm || 0.40 mm, 0.80 mm || 0.4 mm
+| align="left" | Nozzle Diameter ||0.40mm || 0.40 mm, 0.80 mm || 0.40 mm
 |-
 | align="left" | Nominal Print Speed || Coming Soon! || 30 to 300 mm/s || 10-100 cm<sup>3</sup>/hr