3D Printing: Difference between revisions

Revision as of 17:34, 17 October 2017

The Hack.rva hackerspace has three 3D printers in residence: a Prusa i3 MK2 an Ultimaker 3 and an UP Mini.

Here’s a short comparison of three printers:

	Prusa i3 MK2S	Ultimaker 3	UP Mini
Photo		File:Ultimaker.png	File:UPMini.png
Number of Print Heads	1	2	1
Build Platform Envelope	25 x 21 x 20 cm	215 x 215 x 200 mm Single / 197 x 215 x 200 mm Dual	120 x 120 x 120 mm
Heated Build Platform	Yes	Yes (20 ˚C to 100 ˚C)	Yes (Nominally 50 ºC)
Filament Normally Loaded	1.75 mm ABS or PLA	3mm PLA	1.75 mm ABS or PLA
Nozzle Diameter	0.40mm	0.40 mm, 0.80 mm	0.4 mm
Nominal Print Speed	Coming Soon!	30 to 300 mm/s	10-100 cm³/hr
Typical Print Layer Thickness	Coming Soon!	Coming Soon!	0.20 - 0.35 mm
Printing Temperature	Coming Soon!	180 ˚C to 280 ˚C	260-270 ºC ABS or 200 ºC PLA
Web Site	Prusa	Ultimaker	UP 3D USA
User Manual	Manual	Manual	Manual
Hack.RVA Wiki	Coming Soon!	Ultimaker 3	UP Mini
Firmware Version	Coming Soon!	Coming Soon!	V3.0.6
Serial No.	Coming Soon!	Coming Soon!	74314

@@ Line 18: / Line 18: @@
 | align="left" | Nozzle Diameter ||0.40mm || 0.40 mm, 0.80 mm || 0.4 mm
 |-
-| align="left" | Nominal Print Speed || || 30 to 300 mm/s || 10-100 cm<sup>3</sup>/hr
+| align="left" | Nominal Print Speed || Coming Soon! || 30 to 300 mm/s || 10-100 cm<sup>3</sup>/hr
 |-
-| align="left" | Typical Print Layer Thickness || || Coming Soon! || 0.20 - 0.35 mm
+| align="left" | Typical Print Layer Thickness ||Coming Soon!  || Coming Soon! || 0.20 - 0.35 mm
 |-
-| align="left" | Printing Temperature || || 180 ˚C to 280 ˚C || 260-270 &ordm;C ABS or 200 &ordm;C PLA
+| align="left" | Printing Temperature ||Coming Soon!  || 180 ˚C to 280 ˚C || 260-270 &ordm;C ABS or 200 &ordm;C PLA
 |-
 | align="left" | Web Site ||[http://www.prusa3d.com/ Prusa]|| [https://ultimaker.com/ Ultimaker]|| [http://www.up3dusa.com/#!up-mini/c12oh UP 3D USA]