Primary IT Infrastructure: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 7: | Line 7: | ||
== Network Devices == | == Network Devices == | ||
The HackRVA network is comprised of four primary network infrastructure devices. | The HackRVA Labs, Inc. network is comprised of four primary network infrastructure devices. | ||
*SMC Cable Modem/gateway | *SMC Cable Modem/gateway | ||
*Cisco RV180 VPN Router | *Cisco RV180 VPN Router | ||
| Line 15: | Line 15: | ||
== Network Topology == | == Network Topology == | ||
=== VLANs === | === VLANs === | ||
At HackRVA, we have a segmented network using vlans for segregation of traffic. | At HackRVA Labs, Inc. we have a segmented network using vlans for segregation of traffic. | ||
*VLAN-1 is the management network, and houses the management end-points for primary services. | *VLAN-1 is the management network, and houses the management end-points for primary services. | ||
*VLAN-100 is the voip vlan, specifically intended to have all voip traffic. | *VLAN-100 is the voip vlan, specifically intended to have all voip traffic. | ||
*VLAN-200 is the vlan for hackrva-wireless, and is the vlan which you will be assigned to, if access the hackrva-wireless ssid. | *VLAN-200 is the vlan for hackrva-wireless, and is the vlan which you will be assigned to, if access the hackrva-wireless ssid. | ||
*VLAN-300 is the vlan for all wired network infrastructure, and is also the vlan for network services such as email, and dns, as well as network printers. | *VLAN-300 is the vlan for all wired network infrastructure, and is also the vlan for network services such as email, and dns, as well as network printers. | ||
===Subnets (IPv4)=== | |||
At HackRVA Labs, Inc. we have subneting that is assigned to specific vlans. | |||
*VLAN-1 is on subnet 192.168.10.0/24 | |||
*VLAN-100 is on subnet 192.168.100.0/24 | |||
*VLAN-200 is on subnet 192.168.200.0/24 | |||
*VLAN-300 is on subnet 192.168.30.0/24 | |||
===IPv6 addresing=== | |||
HackRVA Labs, Inc. does not currently utilize IPv6 address space. | |||
= Servers = | = Servers = | ||
= Enclosures = | = Enclosures = | ||
Revision as of 01:27, 15 June 2014
Please check back with this page, as we are in the process of populating good information, relating to how to get the most out of your HackRVA data experience.
The primary network architecture
At Hackrva we utilize a switched network with vlans and VoIP support. We have a dedicated smart-switch, a router and a Virtulization Server which runs our web services, and groupware.
Network Devices
The HackRVA Labs, Inc. network is comprised of four primary network infrastructure devices.
- SMC Cable Modem/gateway
- Cisco RV180 VPN Router
- Ubiquiti Wireless AP with PoE adaptor
- NetGear 24-port smart-switch
Network Topology
VLANs
At HackRVA Labs, Inc. we have a segmented network using vlans for segregation of traffic.
- VLAN-1 is the management network, and houses the management end-points for primary services.
- VLAN-100 is the voip vlan, specifically intended to have all voip traffic.
- VLAN-200 is the vlan for hackrva-wireless, and is the vlan which you will be assigned to, if access the hackrva-wireless ssid.
- VLAN-300 is the vlan for all wired network infrastructure, and is also the vlan for network services such as email, and dns, as well as network printers.
Subnets (IPv4)
At HackRVA Labs, Inc. we have subneting that is assigned to specific vlans.
- VLAN-1 is on subnet 192.168.10.0/24
- VLAN-100 is on subnet 192.168.100.0/24
- VLAN-200 is on subnet 192.168.200.0/24
- VLAN-300 is on subnet 192.168.30.0/24
IPv6 addresing
HackRVA Labs, Inc. does not currently utilize IPv6 address space.