Old Laser Cutter: Difference between revisions
Jump to navigation
Jump to search
Aaronn0130 (talk | contribs) mNo edit summary |
Aaronn0130 (talk | contribs) No edit summary |
||
| Line 27: | Line 27: | ||
-the rest is normal | -the rest is normal | ||
* User Laser - MakercamConverter.py on the desktop of the digital design PC. [Media:Laser-MakercamConverter.py Laser - MakercamConverter.py] | |||
Revision as of 17:02, 6 June 2015
The laser cutter is in beta stage. Will be released for member use before not too long.
Here's a wiki [link to the laser cutter while it was in project phase]. If you want to know about how it was built etc, go there.
How to Use the Laser -Turn on computer.
-Turn on laser.
-Make sure coolant is flowing.
-Make sure air is on.
-Make sure all safety guidelines are followed.
wear eye protection no incorrect materials with laser (PVC)
Creating G-Code with CamBam for the lase
-set z-clearance plane to 0.001 (temp)
-set depth increment to 0.001
-set final depth to 0.001
-set tool diameter to 0.001
-the rest is normal
- User Laser - MakercamConverter.py on the desktop of the digital design PC. [Media:Laser-MakercamConverter.py Laser - MakercamConverter.py]