Old Laser Cutter: Difference between revisions
Jump to navigation
Jump to search
Aaronn0130 (talk | contribs) No edit summary |
Aaronn0130 (talk | contribs) mNo edit summary |
||
| Line 16: | Line 16: | ||
no incorrect materials with laser (PVC) | no incorrect materials with laser (PVC) | ||
''Creating G-Code with CamBam for the | ''Creating G-Code with CamBam for the lase'' | ||
-set z-clearance plane to 0.001 (temp) | -set z-clearance plane to 0.001 (temp) | ||
-set depth increment to 0.001 | -set depth increment to 0.001 | ||
-set final depth to 0.001 | -set final depth to 0.001 | ||
-set tool diameter to 0.001 | -set tool diameter to 0.001 | ||
-the rest is normal | -the rest is normal | ||
Revision as of 12:15, 1 February 2015
The laser cutter is in beta stage. Will be released for member use before not too long.
Here's a wiki [link to the laser cutter while it was in project phase]. If you want to know about how it was built etc, go there.
How to Use the Laser -Turn on computer.
-Turn on laser.
-Make sure coolant is flowing.
-Make sure air is on.
-Make sure all safety guidelines are followed.
wear eye protection no incorrect materials with laser (PVC)
Creating G-Code with CamBam for the lase
-set z-clearance plane to 0.001 (temp)
-set depth increment to 0.001
-set final depth to 0.001
-set tool diameter to 0.001
-the rest is normal