3D Printing: Difference between revisions

From HackRVA
Jump to navigation Jump to search
← Older edit
No edit summary
No edit summary
 
(9 intermediate revisions by 2 users not shown)
Line 1: Line 1:
HackRVA has four 3D printers in residence: a Prusa i3 MK3, Prusa i3 MK3S+, [[Ultimaker 3]] and an Elegoo Mars Pro. The Elegoo Mars Pro is a resin 3d printer that uses a liquid photopolymer that is selectively hardened by a UV LCD screen on the bottom of a clear tank. HackRVA usually has a limited selection of Jessie (preferred brand) PETG and PLA for small occasional prints. Members should provide their own filament if they are printing a large project or require a specific type.
HackRVA has five 3D printers in residence: a Prusa i3 MK3, Prusa i3 MK3S+, [[Ultimaker 3]], LulzBot TAZ 6 and an Elegoo Mars Pro. The Elegoo Mars Pro is a resin 3d printer that uses a liquid photopolymer that is selectively hardened by a UV LCD screen on the bottom of a clear tank. HackRVA usually has a limited selection of Jessie (preferred brand) PETG and PLA for small occasional prints. Members should provide their own filament if they are printing a large project or require a specific type.


Here’s a short comparison of the four printers:


{| class="wikitable" style="text-align: center;"
{| class="wikitable" style="text-align: center;"
! !
!  
! Prusa i3 MK3
! Prusa i3 MK3
! Prusa i3 MK3S+
! Prusa i3 MK3S+
! Prusa i3 MK4
! Ultimaker 3
! Ultimaker 3
! LulzBot TAZ 6  
! LulzBot TAZ 6  
Line 13: Line 12:
|-
|-
  | align="left" |
  | align="left" |
  |style="vertical-align:bottom"|[[File:Prusai3mk2s_small.jpg|210px|link=]]
  |style="vertical-align:bottom"|[[File:Prusai3mk2s_small.jpg|130px|link=]]
  |style="vertical-align:bottom"|[[File:MK3s+.png|x250px|link=]]
  |style="vertical-align:bottom"|[[File:MK3s+.png|x150px|link=]]
  |style="vertical-align:bottom"|[[File:Ultimaker3.jpg|260px|link=]]  
|style="vertical-align:bottom"|[[File:mk4.jpg|x150px|link=]]
  |style="vertical-align:bottom"|[[File:TAZ 6.png|250px|link=]]
  |style="vertical-align:bottom"|[[File:Ultimaker3.jpg|160px|link=]]  
  |style="vertical-align:bottom"|[[File:MarsPro.jpg|x250px|link=]]  
  |style="vertical-align:bottom"|[[File:TAZ 6.png|150px|link=]]
  |style="vertical-align:bottom"|[[File:MarsPro.jpg|x150px|link=]]  
|-
|-
| align="left" | Number of Print Heads  
| align="left" | Number of Print Heads  
|| 1
  || 1
  || 1
  || 1
  || 1
Line 28: Line 29:
| align="left" | Build Volume  
| align="left" | Build Volume  
  ||250 x 210 x 200 mm
  ||250 x 210 x 200 mm
||250 x 210 x 210 mm
  ||250 x 210 x 210 mm
  ||250 x 210 x 210 mm
  ||215 x 215 x 200 mm Single<br>197 x 215 x 200 mm Dual  
  ||215 x 215 x 200 mm Single<br>197 x 215 x 200 mm Dual  
Line 35: Line 37:
| align="left" | Heated Build Platform  
| align="left" | Heated Build Platform  
  || Yes (Max 100°C)<br> Smooth, Textured
  || Yes (Max 100°C)<br> Smooth, Textured
|| Yes (Max 120°C)<br> Smooth, Textured
  || Yes (Max 120°C)<br> Smooth, Textured
  || Yes (Max 120°C)<br> Smooth, Textured
  || Yes (Max 100°C) <br> Glass
  || Yes (Max 100°C) <br> Glass
Line 40: Line 43:
  ||  
  ||  
|-
|-
| align="left" | Filament Normally Loaded
| align="left" | Filament Accepted
|| 1.75mm PLA, PETG
|| 1.75mm PLA, PETG  
|| 1.75mm PLA, PETG  
|| 1.75mm PLA, PETG  
|| 1.75mm PLA, PETG  
|| 2.85mm PLA, PETG  
|| 2.85mm PLA, PETG  
|| 1.75mm/2.85mm PLA, PETG  
|| 2.85mm PLA, PETG  
|| Photopolymer Resin  
|| Photopolymer Resin  
|-
|-
| align="left" | Nozzle Diameter  
| align="left" | Nozzle Diameter  
|| 0.40mm  
|| 0.40mm  
|| 0.40mm
|| 0.40mm
|| 0.40mm
|| 0.40 mm
|| 0.40 mm
Line 56: Line 61:
| align="left" | Build Speed  
| align="left" | Build Speed  
  || up to 15 mmᶟ/s  
  || up to 15 mmᶟ/s  
||
  ||
  ||
  || up to 24 mmᶟ/s
  || up to 24 mmᶟ/s
  || 22.5 mm/h
  || 22.5 mm/h
||
|-
|-
| align="left" | Resolution  
| align="left" | Resolution  
|| 50 microns
  || 50 microns
  || 50 microns
  || 50 microns
  || 50 microns
Line 67: Line 75:
  || 25 microns   
  || 25 microns   
|-
|-
| align="left" | Typical Print Layer Thickness  
| align="left" | Print Layer Thickness  
  || 0.05 - 0.3 mm  
  || 0.05 - 0.3 mm  
|| 0.05 - 0.35 mm
  || 0.05 - 0.35 mm
  || 0.05 - 0.35 mm
  || 0.05 - 0.4 mm
  || 0.05 - 0.4 mm
  || 0.01 - 0.2 mm 
  || 0.01 - 0.2 mm 
||
|-
|-
| align="left" | Printing Temperature
| align="left" | Printing Temperature
|| Max 300°C
|| Max 300°C
|| Max 300°C
|| Max 300°C
|| Max 300°C
Line 83: Line 94:
|| [https://help.prusa3d.com/tag/mk3 Prusa i3 MK3]
|| [https://help.prusa3d.com/tag/mk3 Prusa i3 MK3]
|| [https://help.prusa3d.com/tag/mk3s-2 Prusa i3 MK3S+]
|| [https://help.prusa3d.com/tag/mk3s-2 Prusa i3 MK3S+]
|| [https://help.prusa3d.com/tag/mk4 Prusa i3 MK4]
|| [https://support.ultimaker.com/hc/en-us/sections/360003548399-Ultimaker-3 Ultimaker 3]
|| [https://support.ultimaker.com/hc/en-us/sections/360003548399-Ultimaker-3 Ultimaker 3]
|| [https://lulzbot.com/store/taz-6 LulzBot TAZ 6]
|| [https://lulzbot.com/store/taz-6 LulzBot TAZ 6]
Line 89: Line 101:
| align="left" | User Manual  
| align="left" | User Manual  
  ||[https://www.prusa3d.com/downloads/manual/prusa3d_manual_mk3_en_3_04.pdf Manual]  
  ||[https://www.prusa3d.com/downloads/manual/prusa3d_manual_mk3_en_3_04.pdf Manual]  
  ||[https://cdn.prusa3d.com/downloads/manual/prusa3d_manual_mk3s_en.pdf#_ga=2.26290045.1507696172.1662836540-171208064.1659213810&_gac=1.153623114.1660152978.Cj0KCQjwrs2XBhDjARIsAHVymmRPi89pkmc9nMM5Lsm4P5UC92RqI8VKnlcRAQKHZSEiXSJze8E-INcaAmmhEALw_wcB Manual]
  ||[https://cdn.prusa3d.com/downloads/manual/prusa3d_manual_mk3s_en.pdf Manual]
||[https://www.prusa3d.com/downloads/manual/prusa3d_manual_MK4_MK39_103_en.pdf Manual]
  || [https://support.ultimaker.com/hc/en-us/article_attachments/360010836740/Ultimaker_3_manual__En_.pdf Manual]  
  || [https://support.ultimaker.com/hc/en-us/article_attachments/360010836740/Ultimaker_3_manual__En_.pdf Manual]  
  || [http://download.lulzbot.com/TAZ/6.02/documentation/manual/9780989378482_interior_r6.02.pdf Manual]  
  || [http://download.lulzbot.com/TAZ/6.02/documentation/manual/9780989378482_interior_r6.02.pdf Manual]  
Line 95: Line 108:
|-
|-
| align="left" | HackRVA Wiki
| align="left" | HackRVA Wiki
||
  ||
  ||
  ||
  ||
Line 104: Line 118:
||3.11.0
||3.11.0
||3.11.0
||3.11.0
||
||5.3.0.0
||5.3.0.0
||5.3.0.0
||5.3.0.0
Line 111: Line 126:
  ||CZPX2817X003XK26782
  ||CZPX2817X003XK26782
  ||
  ||
||SN24019077439
  ||BPP-003840-027155
  ||BPP-003840-027155
  ||
  ||
Line 118: Line 134:
  || PrusaSlicer
  || PrusaSlicer
  || PrusaSlicer
  || PrusaSlicer
  || Cura  
  || PrusaSlicer
|| Uktimaker Cura  
  || Cura LulzBot Edition
  || Cura LulzBot Edition
  || Chitubox/ Lychee Slicer
  || Chitubox/ Lychee Slicer
|}
|}

Latest revision as of 20:21, 18 August 2024

HackRVA has five 3D printers in residence: a Prusa i3 MK3, Prusa i3 MK3S+, Ultimaker 3, LulzBot TAZ 6 and an Elegoo Mars Pro. The Elegoo Mars Pro is a resin 3d printer that uses a liquid photopolymer that is selectively hardened by a UV LCD screen on the bottom of a clear tank. HackRVA usually has a limited selection of Jessie (preferred brand) PETG and PLA for small occasional prints. Members should provide their own filament if they are printing a large project or require a specific type.


Prusa i3 MK3 Prusa i3 MK3S+ Prusa i3 MK4 Ultimaker 3 LulzBot TAZ 6 Elegoo Mars Pro
Number of Print Heads 1 1 1 2 1
Build Volume 250 x 210 x 200 mm 250 x 210 x 210 mm 250 x 210 x 210 mm 215 x 215 x 200 mm Single
197 x 215 x 200 mm Dual 		280 x 280 x 250 mm 120 x 60 x 155 mm
Heated Build Platform Yes (Max 100°C)
Smooth, Textured 		Yes (Max 120°C)
Smooth, Textured 		Yes (Max 120°C)
Smooth, Textured 		Yes (Max 100°C)
Glass 		Yes (Max 120°C)
Glass with PEI
Filament Accepted 1.75mm PLA, PETG 1.75mm PLA, PETG 1.75mm PLA, PETG 2.85mm PLA, PETG 2.85mm PLA, PETG Photopolymer Resin
Nozzle Diameter 0.40mm 0.40mm 0.40mm 0.40 mm 0.5mm
Build Speed up to 15 mmᶟ/s up to 24 mmᶟ/s 22.5 mm/h
Resolution 50 microns 50 microns 50 microns 20-200 microns 50 microns 25 microns
Print Layer Thickness 0.05 - 0.3 mm 0.05 - 0.35 mm 0.05 - 0.35 mm 0.05 - 0.4 mm 0.01 - 0.2 mm 
Printing Temperature Max 300°C Max 300°C Max 300°C Max 280°C Max 290°C
Web Site Prusa i3 MK3 Prusa i3 MK3S+ Prusa i3 MK4 Ultimaker 3 LulzBot TAZ 6 Elegoo Mars Pro
User Manual Manual Manual Manual Manual Manual Manual
HackRVA Wiki Ultimaker 3
Firmware Version 3.11.0 3.11.0 5.3.0.0 5.3.0.0
Serial No. CZPX2817X003XK26782 SN24019077439 BPP-003840-027155
Software PrusaSlicer PrusaSlicer PrusaSlicer Uktimaker Cura Cura LulzBot Edition Chitubox/ Lychee Slicer
Retrieved from "https://wiki.hackrva.org/index.php?title=3D_Printing&oldid=3267"