3D Printing: Difference between revisions

From HackRVA
Jump to navigation Jump to search
← Older edit
No edit summary
No edit summary
 
(18 intermediate revisions by 2 users not shown)
Line 1: Line 1:
HackRVA has three 3D printers in residence: a Prusa i3 MK3, an [[Ultimaker 3]] and a Form 1+. The Form1+ is a resin type 3d printer that uses a liquid photopolymer that is selectively hardened by a UV laser on the bottom of a clear tank. The makerspace usually has a selection of generic filament for occasional use. Members should provide their own filament if they are printing a large project or require a specific type.
HackRVA has five 3D printers in residence: a Prusa i3 MK3, Prusa i3 MK3S+, [[Ultimaker 3]], LulzBot TAZ 6 and an Elegoo Mars Pro. The Elegoo Mars Pro is a resin 3d printer that uses a liquid photopolymer that is selectively hardened by a UV LCD screen on the bottom of a clear tank. HackRVA usually has a limited selection of Jessie (preferred brand) PETG and PLA for small occasional prints. Members should provide their own filament if they are printing a large project or require a specific type.


Here’s a short comparison of the four printers:


{| class="wikitable" style="text-align: center;"
{| class="wikitable" style="text-align: center;"
! !!Prusa i3 MK3
!  
! Prusa i3 MK3
! Prusa i3 MK3S+
! Prusa i3 MK3S+
! Ultimaker 3  
! Prusa i3 MK4
! Form 1+
! Ultimaker 3
! LulzBot TAZ 6
! Elegoo Mars Pro
|-
|-
| align="left" |
| align="left" |
  ||[[File:Prusai3mk2s_small.jpg]]
  |style="vertical-align:bottom"|[[File:Prusai3mk2s_small.jpg|130px|link=]]
  ||[[File:MK3s+.png|200px]]
  |style="vertical-align:bottom"|[[File:MK3s+.png|x150px|link=]]
  ||[[File:Ultimaker.png]]  
  |style="vertical-align:bottom"|[[File:mk4.jpg|x150px|link=]]
  || [[File:form_1_plus.jpg|200px]]  
|style="vertical-align:bottom"|[[File:Ultimaker3.jpg|160px|link=]]
|style="vertical-align:bottom"|[[File:TAZ 6.png|150px|link=]]
  |style="vertical-align:bottom"|[[File:MarsPro.jpg|x150px|link=]]  
|-
|-
| align="left" | Number of Print Heads  
| align="left" | Number of Print Heads  
|| 1
  || 1
  || 1
  || 1
  || 1
  || 2  
  || 2  
  || 1  
  || 1
|| 
|-
|-
| align="left" | Build Platform Envelope
| align="left" | Build Volume
  ||250 x 210 x 200 mm
  ||250 x 210 x 200 mm
  ||250 x 210 x 210 mm
  ||250 x 210 x 210 mm
  ||215 x 215 x 200 mm Single <br>197 x 215 x 200 mm Dual
||250 x 210 x 210 mm
  || 165 x 124 x 124 mm  
  ||215 x 215 x 200 mm Single<br>197 x 215 x 200 mm Dual  
  ||280 x 280 x 250 mm
||120 x 60 x 155 mm  
|-
|-
| align="left" | Heated Build Platform  
| align="left" | Heated Build Platform  
  || Yes (Max 120°C)
|| Yes (Max 100°C)<br> Smooth, Textured
  || Yes (Max 120°C)
  || Yes (Max 120°C)<br> Smooth, Textured
  || Yes (20°C to 100°C)  
  || Yes (Max 120°C)<br> Smooth, Textured
  || no
  || Yes (Max 100°C) <br> Glass
|| Yes (Max 120°C)<br> Glass with PEI
  ||  
|-
|-
| align="left" | Filament Normally Loaded
| align="left" | Filament Accepted
|| 1.75mm PLA, ABS, PETG  
|| 1.75mm PLA, PETG
|| 1.75mm PLA, ABS, PETG  
|| 1.75mm PLA, PETG  
|| 2.85mm PLA, ABS, PETG  
|| 1.75mm PLA, PETG
|| 2.85mm PLA, PETG  
|| 2.85mm PLA, PETG  
|| Photopolymer Resin  
|| Photopolymer Resin  
|-
|-
| align="left" | Nozzle Diameter  
| align="left" | Nozzle Diameter  
|| 0.40mm  
|| 0.40mm  
|| 0.40 mm, 0.80 mm
|| 0.40mm
|| 405 nm
|| 0.40mm
|| 0.40 mm
|| 0.5mm
||
|-
|-
| align="left" | Build Speed  
| align="left" | Build Speed  
  || up to 15 mmᶟ/s  
  || up to 15 mmᶟ/s  
 
||
||
  || up to 24 mmᶟ/s
  || up to 24 mmᶟ/s
  || 1-3 cm/hr
  || 22.5 mm/h
||
|-
|-
| align="left" | Resolution  
| align="left" | Resolution  
  || 50 microns
  || 50 microns
  ||
  || 50 microns
  || 20 microns
|| 50 microns
  || 20-200 microns
|| 50 microns
  || 25 microns   
  || 25 microns   
|-
|-
| align="left" | Typical Print Layer Thickness  
| align="left" | Print Layer Thickness  
  || 0.05 - 0.3 mm  
  || 0.05 - 0.3 mm  
  || 0.05 - 0.35 mm
  || 0.05 - 0.35 mm
  ||  
  || 0.05 - 0.35 mm
  || 25 - 100 μm 
|| 0.05 - 0.4 mm
  || 0.01 - 0.2 mm 
||
|-
|-
| align="left" | Printing Temperature
| align="left" | Printing Temperature
|| Max 300°C
|| Max 300°C
|| Max 300°C
|| Max 300°C
|| 180–280°C
|| Max 300°C
|| 18–28°C
|| Max 280°C
|| Max 290°C
||  
|-
|-
| align="left" | Web Site  
| align="left" | Web Site  
|| [https://help.prusa3d.com/tag/mk3 Prusa i3 MK3]
|| [https://help.prusa3d.com/tag/mk3 Prusa i3 MK3]
|| [https://help.prusa3d.com/tag/mk3s-2 Prusa i3 MK3S+]
|| [https://help.prusa3d.com/tag/mk3s-2 Prusa i3 MK3S+]
|| [https://help.prusa3d.com/tag/mk4 Prusa i3 MK4]
|| [https://support.ultimaker.com/hc/en-us/sections/360003548399-Ultimaker-3 Ultimaker 3]
|| [https://support.ultimaker.com/hc/en-us/sections/360003548399-Ultimaker-3 Ultimaker 3]
|| [https://support.formlabs.com/s/topic/0TO1Y000000IvrTWAS/form-1?language=en_US Form 1+]  
|| [https://lulzbot.com/store/taz-6 LulzBot TAZ 6]
|| [https://www.elegoo.com/pages/3d-printing-user-support Elegoo Mars Pro]  
|-
|-
| align="left" | User Manual  
| align="left" | User Manual  
  ||[https://www.prusa3d.com/downloads/manual/prusa3d_manual_mk3_en_3_04.pdf Manual]  
  ||[https://www.prusa3d.com/downloads/manual/prusa3d_manual_mk3_en_3_04.pdf Manual]  
  ||[https://cdn.prusa3d.com/downloads/manual/prusa3d_manual_mk3s_en.pdf#_ga=2.26290045.1507696172.1662836540-171208064.1659213810&_gac=1.153623114.1660152978.Cj0KCQjwrs2XBhDjARIsAHVymmRPi89pkmc9nMM5Lsm4P5UC92RqI8VKnlcRAQKHZSEiXSJze8E-INcaAmmhEALw_wcB Manual]
  ||[https://cdn.prusa3d.com/downloads/manual/prusa3d_manual_mk3s_en.pdf Manual]
||[https://www.prusa3d.com/downloads/manual/prusa3d_manual_MK4_MK39_103_en.pdf Manual]
  || [https://support.ultimaker.com/hc/en-us/article_attachments/360010836740/Ultimaker_3_manual__En_.pdf Manual]  
  || [https://support.ultimaker.com/hc/en-us/article_attachments/360010836740/Ultimaker_3_manual__En_.pdf Manual]  
  || [https://support.formlabs.com/s/topic/0TO1Y000000IvrTWAS/form-1?language=en_US Support]
|| [http://download.lulzbot.com/TAZ/6.02/documentation/manual/9780989378482_interior_r6.02.pdf Manual]
  || [https://wiki.hackrva.org/images/8/8e/Mars_Pro_Manual.pdf Manual]
|-
|-
| align="left" | Hack.RVA Wiki
| align="left" | HackRVA Wiki
||
  ||
  ||
  ||
  ||
  ||[[Ultimaker 3]]  
  ||[[Ultimaker 3]]  
  || [[Form 1+]]
  ||
||
|-
|-
| align="left" | Firmware Version
| align="left" | Firmware Version
||3.11.0
||3.11.0
||3.11.0
||3.11.0
||
||5.3.0.0
||5.3.0.0
||5.3.0.0
|| N/A
||
|-
|-
| align="left" | Serial No.
| align="left" | Serial No.
  ||CZPX2817X003XK26782
  ||CZPX2817X003XK26782
  ||
  ||
||SN24019077439
  ||BPP-003840-027155
  ||BPP-003840-027155
  || Sassy Leveret
  ||
||
|-
|-
| align="left" | Software  
| align="left" | Software  
  || PrusaSlicer
  || PrusaSlicer
  || PrusaSlicer
  || PrusaSlicer
  || Cura  
|| PrusaSlicer
  || [https://wiki.hackrva.org/images/d/d0/EN-Using_PreForm_2.20_with_Form_1%2B.pdf Pre Form 2.20]
|| Uktimaker Cura
  || Cura LulzBot Edition
  || Chitubox/ Lychee Slicer
|}
|}

Latest revision as of 20:21, 18 August 2024

HackRVA has five 3D printers in residence: a Prusa i3 MK3, Prusa i3 MK3S+, Ultimaker 3, LulzBot TAZ 6 and an Elegoo Mars Pro. The Elegoo Mars Pro is a resin 3d printer that uses a liquid photopolymer that is selectively hardened by a UV LCD screen on the bottom of a clear tank. HackRVA usually has a limited selection of Jessie (preferred brand) PETG and PLA for small occasional prints. Members should provide their own filament if they are printing a large project or require a specific type.


Prusa i3 MK3 Prusa i3 MK3S+ Prusa i3 MK4 Ultimaker 3 LulzBot TAZ 6 Elegoo Mars Pro
Number of Print Heads 1 1 1 2 1
Build Volume 250 x 210 x 200 mm 250 x 210 x 210 mm 250 x 210 x 210 mm 215 x 215 x 200 mm Single
197 x 215 x 200 mm Dual 		280 x 280 x 250 mm 120 x 60 x 155 mm
Heated Build Platform Yes (Max 100°C)
Smooth, Textured 		Yes (Max 120°C)
Smooth, Textured 		Yes (Max 120°C)
Smooth, Textured 		Yes (Max 100°C)
Glass 		Yes (Max 120°C)
Glass with PEI
Filament Accepted 1.75mm PLA, PETG 1.75mm PLA, PETG 1.75mm PLA, PETG 2.85mm PLA, PETG 2.85mm PLA, PETG Photopolymer Resin
Nozzle Diameter 0.40mm 0.40mm 0.40mm 0.40 mm 0.5mm
Build Speed up to 15 mmᶟ/s up to 24 mmᶟ/s 22.5 mm/h
Resolution 50 microns 50 microns 50 microns 20-200 microns 50 microns 25 microns
Print Layer Thickness 0.05 - 0.3 mm 0.05 - 0.35 mm 0.05 - 0.35 mm 0.05 - 0.4 mm 0.01 - 0.2 mm 
Printing Temperature Max 300°C Max 300°C Max 300°C Max 280°C Max 290°C
Web Site Prusa i3 MK3 Prusa i3 MK3S+ Prusa i3 MK4 Ultimaker 3 LulzBot TAZ 6 Elegoo Mars Pro
User Manual Manual Manual Manual Manual Manual Manual
HackRVA Wiki Ultimaker 3
Firmware Version 3.11.0 3.11.0 5.3.0.0 5.3.0.0
Serial No. CZPX2817X003XK26782 SN24019077439 BPP-003840-027155
Software PrusaSlicer PrusaSlicer PrusaSlicer Uktimaker Cura Cura LulzBot Edition Chitubox/ Lychee Slicer
Retrieved from "https://wiki.hackrva.org/index.php?title=3D_Printing&oldid=3267"