3D Printing: Difference between revisions

From HackRVA
Jump to navigation Jump to search
← Older edit
VisualWikitext
No edit summary
Rterrell (talk | contribs)
79 edits
Removed the Mars, can be added back later if we ever find room for both. Updated Saturn 4 Ultra firmware version, serial number, link to vendor website.
 
(34 intermediate revisions by 3 users not shown)
Line 1: Line 1:
HackRVA has five 3D printers in residence: a Prusa i3 MK3, Prusa i3 MK3S+, [[Ultimaker 3]], LulzBot TAZ 6 and an Elegoo Mars Pro. The Elegoo Mars Pro is a resin 3d printer that uses a liquid photopolymer that is selectively hardened by a UV LCD screen on the bottom of a clear tank. HackRVA usually has a limited selection of Jessie (preferred brand) PETG and PLA for small occasional prints. Members should provide their own filament if they are printing a large project or require a specific type.
HackRVA has several 3D printers in residence, described in the table below. In addition to traditional 3d printing, the Elegoo Saturn 4 Ultra is a resin 3d printer that uses a liquid photopolymer that is selectively hardened by a UV LCD screen on the bottom of a clear tank. HackRVA usually has a limited selection of PETG and PLA for small occasional prints. Members should provide their own filament or liquid resin if they are printing a large project or require a specific type.
 




{| class="wikitable" style="text-align: center;"
{| class="wikitable" style="text-align: center;"
! !
!  
! Prusa i3 MK3
! Original Prusa MK4S (#1)
! Prusa i3 MK3S+
! Original Prusa MK4S (#2)
! Ultimaker 3
! Original Prusa MK4S (#3)
! LulzBot TAZ 6
! Original Prusa XL
! Elegoo Mars Pro
! Elegoo Saturn 4 Ultra
|-
|-
  | align="left" |
  | align="left" |
  |style="vertical-align:bottom"|[[File:Prusai3mk2s_small.jpg|130px|link=]]
  |style="vertical-align:bottom"|[[File:Enclosedmk4.jpg|150x150px|link=]]
  |style="vertical-align:bottom"|[[File:MK3s+.png|x150px|link=]]
  |style="vertical-align:bottom"|[[File:mk4.jpg|x150px|link=]]
  |style="vertical-align:bottom"|[[File:Ultimaker3.jpg|160px|link=]]  
  |style="vertical-align:bottom"|[[File:mk4.jpg|x150px|link=]]
  |style="vertical-align:bottom"|[[File:TAZ 6.png|150px|link=]]
   
  |style="vertical-align:bottom"|[[File:MarsPro.jpg|x150px|link=]]  
|style="vertical-align:bottom"|[[File:PrusaXL5.jpg|x150px|link=]]
   
|style="vertical-align:bottom"|[[File:Saturn-4-Ultra-1.jpg|x150px|link=]]  
|-
|-
| align="left" | Number of Print Heads  
| align="left" | Number of Print Heads  
  || 1
  || 1
  || 1
  || 1
|| 2
  || 1
  || 1
  ||   
  || 5
   
||N/A
|-
|-
| align="left" | Build Volume  
| align="left" | Build Volume  
  ||250 x 210 x 200 mm
  ||250 x 210 x 220 mm
  ||250 x 210 x 210 mm
  ||250 x 210 x 220 mm
  ||215 x 215 x 200 mm Single<br>197 x 215 x 200 mm Dual
  ||250 x 210 x 220 mm
  ||280 x 280 x 250 mm
   
  ||120 x 60 x 155 mm  
||360 × 360 × 360 mm
   
||219 x 123 x 220 mm
|-
|-
| align="left" | Heated Build Platform  
| align="left" | Heated Build Platform  
  || Yes (Max 100°C)<br> Smooth, Textured
  || Yes (Max 120°C)<br> Smooth, Textured
|| Yes (Max 120°C)<br> Smooth, Textured
  || Yes (Max 120°C)<br> Smooth, Textured
  || Yes (Max 120°C)<br> Smooth, Textured
  || Yes (Max 100°C) <br> Glass
   
|| Yes (Max 120°C)<br> Glass with PEI
|| Yes (Max 120°C)<br> Smooth, Textured, Satin
  ||  
   
|| No
|-
|-
| align="left" | Filament Accepted
| align="left" | Filament Accepted
|| 1.75mm PLA, PETG
|| 1.75mm  
|| 1.75mm PLA, PETG
|| 1.75mm  
|| 2.85mm PLA, PETG
|| 1.75mm
|| 2.85mm PLA, PETG
|| 1.75mm
|| Photopolymer Resin  
|| Photopolymer Resin  
|-
|-
| align="left" | Nozzle Diameter  
| align="left" | Nozzle Diameter  
|| 0.40mm
|| 0.25-0.8mm <br>(0.4HF brass installed)
|| 0.40mm
|| 0.25-0.8mm <br>(0.4HF brass installed)
|| 0.40 mm
|| 0.25-0.8mm <br>(0.4HF brass installed)
|| 0.5mm
|| 0.25-0.8mm <br>(0.4HF brass installed)
||   
||  N/A
|-
|-
| align="left" | Build Speed
  | align="left" | Resolution  
  || up to 15 mmᶟ/s
||
|| up to 24 mmᶟ/s
|| 22.5 mm/h
|-
| align="left" | Resolution  
  || 50 microns
  || 50 microns
  || 50 microns
  || 50 microns
|| 20-200 microns
  || 50 microns
  || 50 microns
  || 25 microns   
   
|| 50 microns
   
|| 19 x 24μm (11520*5120)
|-
|-
| align="left" | Print Layer Thickness  
| align="left" | Print Layer Thickness  
  || 0.05 - 0.3 mm  
  || 0.05 - 0.3 mm  
  || 0.05 - 0.35 mm
  || 0.05 - 0.3 mm
  || 0.05 - 0.4 mm
  || 0.05 - 0.3 mm
  || 0.01 - 0.2 mm 
   
|| 0.05 - 0.3 mm
|| 0.01 - 0.2mm
|-
|-
| align="left" | Printing Temperature
| align="left" | Printing Temperature
|| Max 300°C
|| Max 290°C
|| Max 300°C
|| Max 290°C
|| Max 280°C
|| Max 290°C
|| Max 290°C
|| Max 290°C
||  
||  N/A
|-
| align="left" | Enclosed
|| Yes
|| No
|| No
|| Yes
|| Yes
|-
|-
| align="left" | Web Site  
| align="left" | Web Site  
|| [https://help.prusa3d.com/tag/mk3 Prusa i3 MK3]
|| [https://help.prusa3d.com/tag/mk4s Original Prusa MK4S]
|| [https://help.prusa3d.com/tag/mk3s-2 Prusa i3 MK3S+]
|| [https://help.prusa3d.com/tag/mk4s Original Prusa MK4S]
|| [https://support.ultimaker.com/hc/en-us/sections/360003548399-Ultimaker-3 Ultimaker 3]
|| [https://help.prusa3d.com/tag/mk4s Original Prusa MK4S]
|| [https://lulzbot.com/store/taz-6 LulzBot TAZ 6]
|| [https://www.prusa3d.com/product/original-prusa-xl-semi-assembled-single-toolhead-3d-printer/ Original Prusa XL]
|| [https://www.elegoo.com/pages/3d-printing-user-support Elegoo Mars Pro]  
||   [https://us.elegoo.com/collections/lcd-printers/products/saturn-4-ultra-12k-10inch-monochrome-lcd-resin-3d-printer Elegoo Saturn 4 Ultra]
|-
|-
| align="left" | User Manual  
| align="left" | User Manual  
  ||[https://www.prusa3d.com/downloads/manual/prusa3d_manual_mk3_en_3_04.pdf Manual]  
  || [https://help.prusa3d.com/product/mk4s Support]  
  ||[https://cdn.prusa3d.com/downloads/manual/prusa3d_manual_mk3s_en.pdf#_ga=2.26290045.1507696172.1662836540-171208064.1659213810&_gac=1.153623114.1660152978.Cj0KCQjwrs2XBhDjARIsAHVymmRPi89pkmc9nMM5Lsm4P5UC92RqI8VKnlcRAQKHZSEiXSJze8E-INcaAmmhEALw_wcB Manual]
  || [https://help.prusa3d.com/product/mk4s Support]  
  || [https://support.ultimaker.com/hc/en-us/article_attachments/360010836740/Ultimaker_3_manual__En_.pdf Manual]  
  || [https://help.prusa3d.com/product/mk4s Support]  
  || [http://download.lulzbot.com/TAZ/6.02/documentation/manual/9780989378482_interior_r6.02.pdf Manual]  
   
  || [https://wiki.hackrva.org/images/8/8e/Mars_Pro_Manual.pdf Manual]
|| [https://help.prusa3d.com/product/xl Support]
   
|| [https://wiki.hackrva.org/images/0/00/01-User-Manual-For-Saturn-4-Ultra-English-Version.pdf Manual]
|-
|-
| align="left" | HackRVA Wiki
|align="left | hack.rva User Guide
||
|[https://docs.google.com/document/d/1KqlVb1p83_EUG3c8qjVl1lBDOOcALfFgsBXz34Z77lQ Prusa Printers User Guide]
||
|[https://docs.google.com/document/d/1KqlVb1p83_EUG3c8qjVl1lBDOOcALfFgsBXz34Z77lQ Prusa Printers User Guide]
||[[Ultimaker 3]]  
|[https://docs.google.com/document/d/1KqlVb1p83_EUG3c8qjVl1lBDOOcALfFgsBXz34Z77lQ Prusa Printers User Guide]
||
|[https://docs.google.com/document/d/1KqlVb1p83_EUG3c8qjVl1lBDOOcALfFgsBXz34Z77lQ Prusa Printers User Guide]
||
|[[Elegoo Mars Pro User Guide]]
|-
|-
| align="left" | Firmware Version
| align="left" | Firmware Version
||3.11.0
|| 6.2.4
||3.11.0
|| 6.2.4
||5.3.0.0
|| 6.2.4
||5.3.0.0
|| 6.2.4
||
||1.4.9
|-
|-
| align="left" | Serial No.
| align="left" | Serial No.
  ||CZPX2817X003XK26782
  || 10589-37424416<br>00008923/44
  ||
  || 10589-37424416<br>00008704/44
  ||BPP-003840-027155
  || 10589-37424416<br>34910488/44
||
|| 10381-09424416<br>42900724/10
  ||  
   
|| d26a5688f1d90100
|-
|-
| align="left" | Software  
| align="left" | Software  
|| PrusaSlicer
|| PrusaSlicer
  || PrusaSlicer
  || PrusaSlicer
  || PrusaSlicer
  || PrusaSlicer
  || Uktimaker Cura
   
|| Cura LulzBot Edition
|| Chitubox Pro
|| Chitubox/ Lychee Slicer
|}
|}

Latest revision as of 14:05, 22 March 2026

HackRVA has several 3D printers in residence, described in the table below. In addition to traditional 3d printing, the Elegoo Saturn 4 Ultra is a resin 3d printer that uses a liquid photopolymer that is selectively hardened by a UV LCD screen on the bottom of a clear tank. HackRVA usually has a limited selection of PETG and PLA for small occasional prints. Members should provide their own filament or liquid resin if they are printing a large project or require a specific type.


Original Prusa MK4S (#1) Original Prusa MK4S (#2) Original Prusa MK4S (#3) Original Prusa XL Elegoo Saturn 4 Ultra
Number of Print Heads 1 1 1 5 N/A
Build Volume 250 x 210 x 220 mm 250 x 210 x 220 mm 250 x 210 x 220 mm 360 × 360 × 360 mm 219 x 123 x 220 mm
Heated Build Platform Yes (Max 120°C)
Smooth, Textured 		Yes (Max 120°C)
Smooth, Textured 		Yes (Max 120°C)
Smooth, Textured 		Yes (Max 120°C)
Smooth, Textured, Satin 		No
Filament Accepted 1.75mm 1.75mm 1.75mm 1.75mm Photopolymer Resin
Nozzle Diameter 0.25-0.8mm
(0.4HF brass installed) 		0.25-0.8mm
(0.4HF brass installed) 		0.25-0.8mm
(0.4HF brass installed) 		0.25-0.8mm
(0.4HF brass installed) 		N/A
Resolution 50 microns 50 microns 50 microns 50 microns 19 x 24μm (11520*5120)
Print Layer Thickness 0.05 - 0.3 mm 0.05 - 0.3 mm 0.05 - 0.3 mm 0.05 - 0.3 mm 0.01 - 0.2mm
Printing Temperature Max 290°C Max 290°C Max 290°C Max 290°C N/A
Enclosed Yes No No Yes Yes
Web Site Original Prusa MK4S Original Prusa MK4S Original Prusa MK4S Original Prusa XL Elegoo Saturn 4 Ultra
User Manual Support Support Support Support Manual
hack.rva User Guide Prusa Printers User Guide Prusa Printers User Guide Prusa Printers User Guide Prusa Printers User Guide Elegoo Mars Pro User Guide
Firmware Version 6.2.4 6.2.4 6.2.4 6.2.4 1.4.9
Serial No. 10589-37424416
00008923/44 		10589-37424416
00008704/44 		10589-37424416
34910488/44 		10381-09424416
42900724/10 		d26a5688f1d90100
Software PrusaSlicer PrusaSlicer PrusaSlicer PrusaSlicer Chitubox Pro
Retrieved from "https://wiki.hackrva.org/index.php?title=3D_Printing&oldid=3718"