3D Printing: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 34: | Line 34: | ||
||360 × 360 × 360 mm | ||360 × 360 × 360 mm | ||
||120 x 60 x 155 mm | ||120 x 60 x 155 mm | ||
|| | ||219 x 123 x 220 mm | ||
|- | |- | ||
| align="left" | Heated Build Platform | | align="left" | Heated Build Platform | ||
| Line 41: | Line 41: | ||
|| Yes (Max 120°C)<br> Smooth, Textured | || Yes (Max 120°C)<br> Smooth, Textured | ||
|| Yes (Max 120°C)<br> Smooth, Textured, Satin | || Yes (Max 120°C)<br> Smooth, Textured, Satin | ||
|| | || No | ||
|| | || No | ||
|- | |- | ||
| align="left" | Filament Accepted | | align="left" | Filament Accepted | ||
| Line 65: | Line 65: | ||
|| 50 microns | || 50 microns | ||
|| 50 microns | || 50 microns | ||
|| | || 0.047mm (2560*1440) | ||
|| | || 19 x 24μm (11520*5120) | ||
|- | |- | ||
| align="left" | Print Layer Thickness | | align="left" | Print Layer Thickness | ||
| Line 73: | Line 73: | ||
|| 0.05 - 0.3 mm | || 0.05 - 0.3 mm | ||
|| 0.05 - 0.3 mm | || 0.05 - 0.3 mm | ||
|| | || 0.01 - 0.2mm | ||
|| | || 0.01 - 0.2mm | ||
|- | |- | ||
| align="left" | Printing Temperature | | align="left" | Printing Temperature | ||
Latest revision as of 16:56, 2 December 2025
HackRVA has several 3D printers in residence, described in the table below. In addition to traditional 3d printing, the Elegoo Mars Pro is a resin 3d printer that uses a liquid photopolymer that is selectively hardened by a UV LCD screen on the bottom of a clear tank. HackRVA usually has a limited selection of Jessie (preferred brand) PETG and PLA for small occasional prints. Members should provide their own filament if they are printing a large project or require a specific type.
| Original Prusa MK4S (#1) | Original Prusa MK4S (#2) | Original Prusa MK4S (#3) | Original Prusa XL | Elegoo Mars Pro | Elegoo Saturn 4 Ultra | |
|---|---|---|---|---|---|---|
|
|
|
|
|
| |
| Number of Print Heads | 1 | 1 | 1 | 5 | ||
| Build Volume | 250 x 210 x 220 mm | 250 x 210 x 220 mm | 250 x 210 x 220 mm | 360 × 360 × 360 mm | 120 x 60 x 155 mm | 219 x 123 x 220 mm |
| Heated Build Platform | Yes (Max 120°C) Smooth, Textured |
Yes (Max 120°C) Smooth, Textured |
Yes (Max 120°C) Smooth, Textured |
Yes (Max 120°C) Smooth, Textured, Satin |
No | No |
| Filament Accepted | 1.75mm | 1.75mm | 1.75mm | 1.75mm | Photopolymer Resin | Photopolymer Resin |
| Nozzle Diameter | 0.25-0.8mm (0.4HF brass installed) |
0.25-0.8mm (0.4HF brass installed) |
0.25-0.8mm (0.4HF brass installed) |
0.25-0.8mm (0.4HF brass installed) |
||
| Resolution | 50 microns | 50 microns | 50 microns | 50 microns | 0.047mm (2560*1440) | 19 x 24μm (11520*5120) |
| Print Layer Thickness | 0.05 - 0.3 mm | 0.05 - 0.3 mm | 0.05 - 0.3 mm | 0.05 - 0.3 mm | 0.01 - 0.2mm | 0.01 - 0.2mm |
| Printing Temperature | Max 290°C | Max 290°C | Max 290°C | Max 290°C | ||
| Enclosed | Yes | No | No | Yes | Yes | Yes |
| Web Site | Original Prusa MK4S | Original Prusa MK4S | Original Prusa MK4S | Original Prusa XL | Elegoo Mars Pro | |
| User Manual | Support | Support | Support | Support | Manual | Manual |
| hack.rva User Guide | Prusa Printers User Guide | Prusa Printers User Guide | Prusa Printers User Guide | Prusa Printers User Guide | Elegoo Mars Pro User Guide | Elegoo Mars Pro User Guide |
| Firmware Version | 6.2.4 | 6.2.4 | 6.2.4 | 6.2.4 | ||
| Serial No. | 10589-37424416 00008923/44 |
10589-37424416 00008704/44 |
10589-37424416 34910488/44 |
10381-09424416 42900724/10 |
MP0220200401 | S4U255N0371 |
| Software | PrusaSlicer | PrusaSlicer | PrusaSlicer | PrusaSlicer | Lychee Slicer | Chitubox, Lychee Slicer |