CNC Routing: Difference between revisions
Jump to navigation
Jump to search
Created page with "The Hack.rva hackerspace ..." |
mNo edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
The | HackRVA has two CNC routing machines in the workshop that can be used for milling wood and various plastics. '''Both of these tools require training to operate.''' | ||
== X-Carve == | |||
CNC Router by Inventables This is a small, easier-to-use CNC router. It is run by the software Easel, also from Inventables. Easel requires a free account with Inventables. | |||
[[File:Xcarve.png]] | |||
== Avid PRO6096 == | |||
The Avid Pro Router is a 5' x 8' bed router that has a Plug-and-Play 2.2kW (3HP) Spindle. The CNC router was purchased in 2019 and completed assembly and installation in early 2020. | |||
[[File:Avid CNC.jpg|none|thumb]] | |||
== Dress appropriately == | |||
# Safety glasses. | |||
# Closed toed shoes or boots. | |||
# Long hair must be tied back, tucked in, or otherwise wrangled so that it will not be wrapped or snagged by the machine. | |||
# No loose clothes such as ties, draw strings, bolos, skirts, sleeves, hoods, or capes. Roll long sleeves to the elbow or wear short sleeves. | |||
# Do not wear heavy gloves while operating machines. Thick nitrile gloves are appropriate, but leather or work gloves are a snagging hazard. | |||
== Learning Resources == | |||
Follow the links below for more details on the capabilities of each machine, operating manuals, and learning resources. | |||
[[X-Carve]] | |||
[[Avid PRO6096]] | |||
Latest revision as of 10:01, 29 May 2025
HackRVA has two CNC routing machines in the workshop that can be used for milling wood and various plastics. Both of these tools require training to operate.
X-Carve
CNC Router by Inventables This is a small, easier-to-use CNC router. It is run by the software Easel, also from Inventables. Easel requires a free account with Inventables.
Avid PRO6096
The Avid Pro Router is a 5' x 8' bed router that has a Plug-and-Play 2.2kW (3HP) Spindle. The CNC router was purchased in 2019 and completed assembly and installation in early 2020.
Dress appropriately
- Safety glasses.
- Closed toed shoes or boots.
- Long hair must be tied back, tucked in, or otherwise wrangled so that it will not be wrapped or snagged by the machine.
- No loose clothes such as ties, draw strings, bolos, skirts, sleeves, hoods, or capes. Roll long sleeves to the elbow or wear short sleeves.
- Do not wear heavy gloves while operating machines. Thick nitrile gloves are appropriate, but leather or work gloves are a snagging hazard.
Learning Resources
Follow the links below for more details on the capabilities of each machine, operating manuals, and learning resources.