Colorgraphix 3 5632E: Difference between revisions

Latest revision as of 16:57, 5 January 2024

Colorgraphix 3 5632E

Overview This document describes the use of ANSI escape codes to control a network-connected display board. It includes instructions for text coloring, screen control, and cursor positioning, as well as guidance on establishing a network connection to the display board or a Lantronix UTS Serial Adapter.

ANSI Escape Codes Screen Control:

Clear Screen: '\033[2J' clears the entire display.

Reset Cursor: '\033[H' moves the cursor to the home position (top-left corner). Cursor Positioning:

Position Cursor: '\033[{line};{column}H' moves the cursor to the specified line and column. Color Configuration:

COLOR_GREEN_BLACK: Green text on a black background. ANSI Code: chr(27) + '[31{'.

COLOR_RED_BLACK: Red text on a black background. ANSI Code: chr(27) + '[30{'.

COLOR_ORANGE_BLACK: Orange text on a black background. ANSI Code: chr(27) + '[29{'.

COLOR_BLACK_GREEN: Black text on a green background. ANSI Code: chr(27) + '[63{'.

COLOR_BLACK_RED: Black text on a red background. ANSI Code: chr(27) + '[62{'.

COLOR_BLACK_ORANGE: Black text on an orange background. ANSI Code: chr(27) + '[61{'.

Network Connection to Display Board TCP/IP Connection:

To control a display board over a network, establish a TCP socket connection. IP Address: Replace '10.200.200.98' with the actual IP address of your display board. Port: Use port 23 for standard Telnet connections to the display board. Connection to Lantronix UTS Serial Adapter:

For connecting to devices through a Lantronix UTS Serial Adapter, use Telnet. IP Address: The IP of the Lantronix adapter. Port: Use port 9999 for the Lantronix UTS Serial Adapter (Model: Snr 1363-058 V3.6).

import socket import time

COLUMNS = 32 LINES = 4

COLOR_GREEN_BLACK = chr(27) + '[31{' COLOR_RED_BLACK = chr(27) + '[30{' COLOR_ORANGE_BLACK = chr(27) + '[29{' COLOR_BLACK_GREEN = chr(27) + '[63{' COLOR_BLACK_RED = chr(27) + '[62{' COLOR_BLACK_ORANGE = chr(27) + '[61{'

Constants

DISPLAY_TEXT = "Hack RVA" DISPLAY_DELAY = 2 # Delay for display in seconds

Establish socket connection

host = '10.200.200.98' # Replace with the correct host port = 23 # Replace with the correct port sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM) sock.connect((host, port))

Clear the display

sock.sendall(chr(27).encode() + "[2J".encode())

Reset cursor

sock.sendall(chr(27).encode() + "[H".encode())

set cursor position

cursor_position = chr(27) + f'[{2};{10}H' sock.sendall(cursor_position.encode())

Display the text in

message = COLOR_BLACK_RED + DISPLAY_TEXT sock.sendall(message.encode())

Wait for a while

time.sleep(DISPLAY_DELAY)

Close the socket

sock.close()

https://dchote.tumblr.com/post/24206361892/telegenix-led-wallboard-update

@@ Line 1: / Line 1: @@
-===Colorgraphix 3 5632E===
+==Colorgraphix 3 5632E==
 Overview
 This document describes the use of ANSI escape codes to control a network-connected display board. It includes instructions for text coloring, screen control, and cursor positioning, as well as guidance on establishing a network connection to the display board or a Lantronix UTS Serial Adapter.
@@ Line 7: / Line 7: @@
 Clear Screen: '\033[2J' clears the entire display.
 Reset Cursor: '\033[H' moves the cursor to the home position (top-left corner).
 Cursor Positioning:
@@ Line 14: / Line 15: @@
 COLOR_GREEN_BLACK: Green text on a black background. ANSI Code: chr(27) + '[31{'.
 COLOR_RED_BLACK: Red text on a black background. ANSI Code: chr(27) + '[30{'.
 COLOR_ORANGE_BLACK: Orange text on a black background. ANSI Code: chr(27) + '[29{'.
 COLOR_BLACK_GREEN: Black text on a green background. ANSI Code: chr(27) + '[63{'.
 COLOR_BLACK_RED: Black text on a red background. ANSI Code: chr(27) + '[62{'.
 COLOR_BLACK_ORANGE: Black text on an orange background. ANSI Code: chr(27) + '[61{'.
 Network Connection to Display Board
 TCP/IP Connection:
@@ Line 30: / Line 37: @@
 IP Address: The IP of the Lantronix adapter.
 Port: Use port 9999 for the Lantronix UTS Serial Adapter (Model: Snr 1363-058 V3.6).
+import socket
+import time
+COLUMNS = 32
+LINES = 4
+COLOR_GREEN_BLACK = chr(27) + '[31{'
+COLOR_RED_BLACK = chr(27) + '[30{'
+COLOR_ORANGE_BLACK = chr(27) + '[29{'
+COLOR_BLACK_GREEN = chr(27) + '[63{'
+COLOR_BLACK_RED = chr(27) + '[62{'
+COLOR_BLACK_ORANGE = chr(27) + '[61{'
+# Constants
+DISPLAY_TEXT = "Hack RVA"
+DISPLAY_DELAY = 2  # Delay for display in seconds
+# Establish socket connection
+host = '10.200.200.98'  # Replace with the correct host
+port = 23              # Replace with the correct port
+sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+sock.connect((host, port))
+# Clear the display
+sock.sendall(chr(27).encode() + "[2J".encode())
+# Reset cursor
+sock.sendall(chr(27).encode() + "[H".encode())
+# set cursor position
+cursor_position = chr(27) + f'[{2};{10}H'
+sock.sendall(cursor_position.encode())
+# Display the text in
+message = COLOR_BLACK_RED + DISPLAY_TEXT
+sock.sendall(message.encode())
+# Wait for a while
+time.sleep(DISPLAY_DELAY)
+# Close the socket
+sock.close()
+https://dchote.tumblr.com/post/24206361892/telegenix-led-wallboard-update
+[[File:Openhouse5632E.jpeg|400px]]

Colorgraphix 3 5632E: Difference between revisions

Latest revision as of 16:57, 5 January 2024

Colorgraphix 3 5632E

Navigation menu

Search