View source for Vinyl Plotter & Cutter - Mimaki CG-130FX



[http://mimaki.com/archives/034/201301/CGFX_Operation_D200805_V2.0.pdf Manual]

http://mimaki.com/product/cutting/c-roll/cg-fx-series/driver.html?driver=81072

[[File:CG-130FX.png]]


== Instructions for Use ==
* Plug in usb cable into PC (The 3D design station computer is right next to it)
* Power on computer and cutter
* Wait for cutter to load / buffer
* Press the left arrow button to set the cutter to use
* Press "End" when TP1 shows on the LCD panel
* Press / hold the up/down left/right arrow keys to move origin
* Press "Enter / HOLD" to set origin point
* Press "Remote On" to toggle computer control of the cutter

== Setting up Vinyl Master ==
Under tools -> Plugins and Modules -> Vinyl Spooler -> Configuration Tab

Ensure settings match this graphic:

[[File:mimaki-settings.png]]

== Notes / Potential Issue ==
* On boot up if you do not press left arrow when selecting vinyl roll it may spit the entire roll out
* Auto cutting may not always work (may kick paper)


[[category:equipment]][[category:design]][[category:Main Room]]