X-Carve - Revision history

Rterrell at 23:56, 3 September 2025

2025-09-03T23:56:11Z

← Older revision		Revision as of 19:56, 3 September 2025
Line 14:		Line 14:
	212oz NEMA 23 stepper motors		212oz NEMA 23 stepper motors

	=General Use=		= HackRVA X-Carve Implementation =
	~~A vacuum is wired into the switch that controls the router. Vacuum use is required but the attachment is optional.~~ The bed is a board with a grid of threaded holes. Hold down devices are attached to the bed with thumb screws~~. All of thes are in small bins along the front of the bed~~. A waste board must always be used with through cutting to prevent damage to the bed.		[[File:X-Carve Implementation.jpg\|none\|thumb\|641x641px]]

			= General Use =
			The bed is a board with a grid of threaded holes. Hold down devices are attached to the bed with thumb screws. A waste board must always be used with through cutting to prevent damage to the bed.

	=More Info=		=More Info=

Megan: /* More Info */

2025-06-29T19:41:40Z

More Info

← Older revision		Revision as of 15:41, 29 June 2025
Line 20:		Line 20:

	[https://wiki.hackrva.org/images/b/bd/X-Carve_Quick_Guide_Update.pdf HackRVA Quick Start Guide]<br>		[https://wiki.hackrva.org/images/b/bd/X-Carve_Quick_Guide_Update.pdf HackRVA Quick Start Guide]<br>
	[https://www.matterhackers.com/store/l/inventables-x-carve-1000/sk/MMY5K70W?gclid=CjwKCAiAhp_jBRAxEiwAXbniXZIjAgbLUkTKW8vb2YBbcPxJry-ZHYQCLSTFcGTKEb6xZwVi03k54hoCdQQQAvD_BwE Inventables X-Carve 1000mm]<br>
	[http://x-carve-instructions.inventables.com/1000mm/ User manual]<br>		[http://x-carve-instructions.inventables.com/1000mm/ User manual]<br>
	[http://easel.inventables.com/users/sign_in Easel (application that runs the Xcarve)]<br>		[http://easel.inventables.com/users/sign_in Easel (application that runs the Xcarve)]<br>
	[https://support.easel.com/hc/en-us/articles/360012593053-I-am-a-beginner-Where-can-I-find-learning-resources Easel Learning Resources for Beginners]		[https://support.easel.com/hc/en-us/articles/360012593053-I-am-a-beginner-Where-can-I-find-learning-resources Easel Learning Resources for Beginners]

Megan: /* General Use */

2025-06-29T19:41:08Z

General Use

← Older revision		Revision as of 15:41, 29 June 2025
Line 15:		Line 15:

	=General Use=		=General Use=
	A vacuum is wired into the switch that controls the router. ~~Without~~ the ~~vacuum, large amounts of fine dust are generated~~. ~~<br/>~~		A vacuum is wired into the switch that controls the router. Vacuum use is required but the attachment is optional. The bed is a board with a grid of threaded holes. Hold down devices are attached to the bed with thumb screws. All of thes are in small bins along the front of the bed. A waste board must always be used with through cutting to prevent damage to the bed.
	The bed is a board with a grid of threaded holes. Hold down devices are attached to the bed with thumb screws. All of thes are in small bins along the front of the bed. A waste board must always be used ~~when~~ cutting to prevent damage to the bed.~~<br />~~

	=More Info=		=More Info=

Megan: /* About */

2025-06-29T19:37:34Z

About

← Older revision		Revision as of 15:37, 29 June 2025
Line 9:		Line 9:
	Bed Size: 1000mm²<br>		Bed Size: 1000mm²<br>
	Cuttable area: 27" <br>		Cuttable area: 27" <br>
	<br> ~~wide makerslide~~		Wide makerslide<br>
	Direct Z drive<br>		Direct Z drive<br>
	9mm 3GT belts<br>		9mm 3GT belts<br>

Megan at 19:37, 29 June 2025

2025-06-29T19:37:14Z

← Older revision		Revision as of 15:37, 29 June 2025
Line 1:		Line 1:
	[[Category:Woodshop]]		[[Category:Woodshop]]
	[[Category:Equipment]]		[[Category:Equipment]]
	~~CNC Router by Inventables~~
	~~This is a small, easier-to-use CNC router. It is run by the software Easel, also from Inventables. Easel requires a free account with Inventables. <br />~~
	~~The router is a standard wood router. Several kinds of bit are provided. Materials to be cut should be wood.<br />~~
	~~A vacuum is wired into the switch that controls the router. Without the vacuum, large amounts of fine dust are generated. <br/>~~
	The bed is a board with a grid of threaded holes. Hold down devices are attached to the bed with thumb screws. All of thes are in small bins along the front of the bed. A waste board must always be used when cutting to prevent damage to the bed.<br />

	[[File:Xcarve.png]]		[[File:Xcarve.png]]
			=About=
			The X-Carve is a CNC router by Inventables that is beginner friendly and very easy to use. It is run by the cloud based software Easel, also from Inventables, which requires a free account to use. HackRVA has a pro account available to use while at the space that allows access to all premium features in the software. The router is a standard Dewalt 611 router that takes 1/8" and 1/4" bits. No metal cutting.

	~~[https~~:/~~/www.matterhackers.com/store/l/inventables-x-carve-1000/sk/MMY5K70W?gclid=CjwKCAiAhp_jBRAxEiwAXbniXZIjAgbLUkTKW8vb2YBbcPxJry-ZHYQCLSTFcGTKEb6xZwVi03k54hoCdQQQAvD_BwE Inventables X-Carve 1000mm]~~		Current Specs:<br>
			Pre 2021 model w/ 2021 Upgrade Kit<Br>
			Bed Size: 1000mm²<br>
			Cuttable area: 27" <br>
			<br> wide makerslide
			Direct Z drive<br>
			9mm 3GT belts<br>
			212oz NEMA 23 stepper motors

	~~[http:~~/~~/x-carve-instructions~~.~~inventables~~.~~com/1000mm~~/ ~~User manual]~~		=General Use=
			A vacuum is wired into the switch that controls the router. Without the vacuum, large amounts of fine dust are generated. <br/>
			The bed is a board with a grid of threaded holes. Hold down devices are attached to the bed with thumb screws. All of thes are in small bins along the front of the bed. A waste board must always be used when cutting to prevent damage to the bed.<br />

	~~[http://easel.inventables.com/users/sign_in Easel (application that runs the Xcarve)]~~		=More Info=

			[https://wiki.hackrva.org/images/b/bd/X-Carve_Quick_Guide_Update.pdf HackRVA Quick Start Guide]<br>
			[https://www.matterhackers.com/store/l/inventables-x-carve-1000/sk/MMY5K70W?gclid=CjwKCAiAhp_jBRAxEiwAXbniXZIjAgbLUkTKW8vb2YBbcPxJry-ZHYQCLSTFcGTKEb6xZwVi03k54hoCdQQQAvD_BwE Inventables X-Carve 1000mm]<br>
			[http://x-carve-instructions.inventables.com/1000mm/ User manual]<br>
			[http://easel.inventables.com/users/sign_in Easel (application that runs the Xcarve)]<br>
	[https://support.easel.com/hc/en-us/articles/360012593053-I-am-a-beginner-Where-can-I-find-learning-resources Easel Learning Resources for Beginners]		[https://support.easel.com/hc/en-us/articles/360012593053-I-am-a-beginner-Where-can-I-find-learning-resources Easel Learning Resources for Beginners]

Rterrell: Added link to learning resources for Easel and XCarve

2025-05-29T11:26:09Z

Added link to learning resources for Easel and XCarve

← Older revision		Revision as of 07:26, 29 May 2025
Line 14:		Line 14:

	[http://easel.inventables.com/users/sign_in Easel (application that runs the Xcarve)]		[http://easel.inventables.com/users/sign_in Easel (application that runs the Xcarve)]

			[https://support.easel.com/hc/en-us/articles/360012593053-I-am-a-beginner-Where-can-I-find-learning-resources Easel Learning Resources for Beginners]

Kent.durvin at 04:03, 30 December 2019

2019-12-30T04:03:16Z

← Older revision		Revision as of 00:03, 30 December 2019
Line 2:		Line 2:
	[[Category:Equipment]]		[[Category:Equipment]]
	CNC Router by Inventables		CNC Router by Inventables
	This is a small, easier-to-use CNC router. It is run by the software Easel, also from Inventables.		This is a small, easier-to-use CNC router. It is run by the software Easel, also from Inventables. Easel requires a free account with Inventables. <br />
			The router is a standard wood router. Several kinds of bit are provided. Materials to be cut should be wood.<br />
			A vacuum is wired into the switch that controls the router. Without the vacuum, large amounts of fine dust are generated. <br/>
			The bed is a board with a grid of threaded holes. Hold down devices are attached to the bed with thumb screws. All of thes are in small bins along the front of the bed. A waste board must always be used when cutting to prevent damage to the bed.<br />

	[[File:Xcarve.png]]		[[File:Xcarve.png]]

Kent.durvin: Add Easel link

2019-12-20T16:22:47Z

Add Easel link

← Older revision		Revision as of 12:22, 20 December 2019
Line 9:		Line 9:

	[http://x-carve-instructions.inventables.com/1000mm/ User manual]		[http://x-carve-instructions.inventables.com/1000mm/ User manual]

			[http://easel.inventables.com/users/sign_in Easel (application that runs the Xcarve)]

Kent.durvin at 15:09, 17 February 2019

2019-02-17T15:09:11Z

← Older revision		Revision as of 11:09, 17 February 2019
Line 3:		Line 3:
	CNC Router by Inventables		CNC Router by Inventables
	This is a small, easier-to-use CNC router. It is run by the software Easel, also from Inventables.		This is a small, easier-to-use CNC router. It is run by the software Easel, also from Inventables.

	[[File:Xcarve.png]]		[[File:Xcarve.png]]

	[https://www.matterhackers.com/store/l/inventables-x-carve-1000/sk/MMY5K70W?gclid=CjwKCAiAhp_jBRAxEiwAXbniXZIjAgbLUkTKW8vb2YBbcPxJry-ZHYQCLSTFcGTKEb6xZwVi03k54hoCdQQQAvD_BwE Inventables X-Carve 1000mm]		[https://www.matterhackers.com/store/l/inventables-x-carve-1000/sk/MMY5K70W?gclid=CjwKCAiAhp_jBRAxEiwAXbniXZIjAgbLUkTKW8vb2YBbcPxJry-ZHYQCLSTFcGTKEb6xZwVi03k54hoCdQQQAvD_BwE Inventables X-Carve 1000mm]

	[http://x-carve-instructions.inventables.com/1000mm/ ~~user~~ manual]		[http://x-carve-instructions.inventables.com/1000mm/ User manual]

Kent.durvin: Moved user manual link from page Xcarve to this page, X-carve, and added a description.

2019-02-17T15:07:33Z

Moved user manual link from page Xcarve to this page, X-carve, and added a description.

← Older revision		Revision as of 11:07, 17 February 2019
Line 2:		Line 2:
	[[Category:Equipment]]		[[Category:Equipment]]
	CNC Router by Inventables		CNC Router by Inventables
			This is a small, easier-to-use CNC router. It is run by the software Easel, also from Inventables.
	[[File:Xcarve.png]]		[[File:Xcarve.png]]

	[https://www.matterhackers.com/store/l/inventables-x-carve-1000/sk/MMY5K70W?gclid=CjwKCAiAhp_jBRAxEiwAXbniXZIjAgbLUkTKW8vb2YBbcPxJry-ZHYQCLSTFcGTKEb6xZwVi03k54hoCdQQQAvD_BwE Inventables X-Carve 1000mm]		[https://www.matterhackers.com/store/l/inventables-x-carve-1000/sk/MMY5K70W?gclid=CjwKCAiAhp_jBRAxEiwAXbniXZIjAgbLUkTKW8vb2YBbcPxJry-ZHYQCLSTFcGTKEb6xZwVi03k54hoCdQQQAvD_BwE Inventables X-Carve 1000mm]

			[http://x-carve-instructions.inventables.com/1000mm/ user manual]