Filament - Revision history

Megan at 05:12, 5 December 2024

2024-12-05T05:12:40Z

← Older revision		Revision as of 01:12, 5 December 2024
Line 1:		Line 1:
	(Not currently up to date)		(Not currently up to date)

	hackRVA has a wide selection of filament from multiple vendors so our members can create until their hearts are content.		hackRVA has a wide selection of filament from multiple vendors so our members can create until their hearts are content.

Megan at 05:12, 5 December 2024

2024-12-05T05:12:30Z

← Older revision		Revision as of 01:12, 5 December 2024
Line 1:		Line 1:
			(Not currently up to date)
	hackRVA has a wide selection of filament from multiple vendors so our members can create until their hearts are content.		hackRVA has a wide selection of filament from multiple vendors so our members can create until their hearts are content.

24foxtrot at 22:41, 17 August 2019

2019-08-17T22:41:42Z

← Older revision		Revision as of 18:41, 17 August 2019
Line 1:		Line 1:

	hackRVA has a wide selection of filament from multiple vendors so our members can create until their hearts are content.		hackRVA has a wide selection of filament from multiple vendors so our members can create until their hearts are content.


	Each spool of filament has a makerspace standardized label on it with details to aid in printing.		Each spool of filament has a makerspace standardized label on it with details to aid in printing.

24foxtrot: 24foxtrot moved page Filaments to Filament

2019-08-17T22:39:26Z

24foxtrot moved page Filaments to Filament

← Older revision	Revision as of 18:39, 17 August 2019
(No difference)

24foxtrot at 22:38, 17 August 2019

2019-08-17T22:38:25Z

← Older revision		Revision as of 18:38, 17 August 2019
Line 62:		Line 62:
	\| align="left" \| Ultimaker\|\|PVA\|\|2.85MM\|\|Natural\|\|210\|\|225\|\|210\|\|225\|\|\|\|\|\|[https://ultimaker.com/materials/pva more info]\|\|Dissolves in ordinary tap water		\| align="left" \| Ultimaker\|\|PVA\|\|2.85MM\|\|Natural\|\|210\|\|225\|\|210\|\|225\|\|\|\|\|\|[https://ultimaker.com/materials/pva more info]\|\|Dissolves in ordinary tap water
	\|}		\|}


	All temperatures are Celsius.		All temperatures are Celsius.


	[[Category:Equipment]]		[[Category:Equipment]]

24foxtrot: /* * THIS PAGE IS BEING CREATED * */

2019-08-16T04:50:07Z

*** THIS PAGE IS BEING CREATED ***

← Older revision		Revision as of 00:50, 16 August 2019
Line 1:		Line 1:
	~~== * THIS PAGE IS BEING CREATED * ==~~

	hackRVA has a wide selection of filament from multiple vendors so our members can create until their hearts are content.		hackRVA has a wide selection of filament from multiple vendors so our members can create until their hearts are content.

24foxtrot at 04:42, 16 August 2019

2019-08-16T04:42:57Z

← Older revision		Revision as of 00:42, 16 August 2019
Line 15:		Line 15:
	\| align="left" \| Gizmo Dorks\|\|ABS\|\|1.75MM\|\|Grey\|\|230\|\|250\|\|110\|\|110\|\|\|\|\|\|[https://gizmodorks.com/abs-3d-printer-filament/ more info]\|\|		\| align="left" \| Gizmo Dorks\|\|ABS\|\|1.75MM\|\|Grey\|\|230\|\|250\|\|110\|\|110\|\|\|\|\|\|[https://gizmodorks.com/abs-3d-printer-filament/ more info]\|\|
	\|-		\|-
	\| align="left" \| Hatchbox\|\|ABS\|\|1.75MM\|\|Transparent Green\|\|210\|\|240\|\|\|\|\|\|\|\|\|\|https://www.hatchbox3d.com/products/3d-abs-1kg1-75-tgrn more info]\|\|		\| align="left" \| Hatchbox\|\|ABS\|\|1.75MM\|\|Transparent Green\|\|210\|\|240\|\|\|\|\|\|\|\|\|\|[https://www.hatchbox3d.com/products/3d-abs-1kg1-75-tgrn more info]\|\|
	\|-		\|-
	\| align="left" \| MakerBot\|\|ABS\|\|1.75MM\|\|True Blue\|\|230\|\|230\|\|105\|\|105\|\|\|\|230\|\|[https://store.makerbot.com/3d-printers/replicator-materials/abs-large/#truebluehttps://store.makerbot.com/3d-printers/replicator-materials/abs-large/#trueblue more info]\|\|Instructions portray Print temp as Nozzle temp		\| align="left" \| MakerBot\|\|ABS\|\|1.75MM\|\|True Blue\|\|230\|\|230\|\|105\|\|105\|\|\|\|230\|\|[https://store.makerbot.com/3d-printers/replicator-materials/abs-large/#truebluehttps://store.makerbot.com/3d-printers/replicator-materials/abs-large/#trueblue more info]\|\|Instructions portray Print temp as Nozzle temp

24foxtrot at 04:20, 16 August 2019

2019-08-16T04:20:37Z

← Older revision		Revision as of 00:20, 16 August 2019
Line 1:		Line 1:
	~~hackRVA has a collection of filaments from multiple vendors for our members.~~		== * THIS PAGE IS BEING CREATED * ==

	~~All temperatures are Celsius.~~

	~~== * THIS PAGE IS BEING CREATED * ==~~		hackRVA has a wide selection of filament from multiple vendors so our members can create until their hearts are content.


	~~Every~~ spool of filament has a makerspace standardized label on it with details to aid in printing.		Each spool of filament has a makerspace standardized label on it with details to aid in printing.
	At minimum these details ~~are~~ manufacturer, type, size, color, ~~minimum and maximum~~ print ~~temp and minimum~~ and ~~maximum bed temp~~ if required.		At minimum these details include manufacturer, type, size, color, print temperatures and if required bed temperatures. If there are any special printing instructions those are also included.
	If there are any special printing ~~instaructions~~ those are also included.

			Below is a list of what we currently have in stock.

	{\| class="wikitable" style="text-align: center;"		{\| class="wikitable" style="text-align: center;"
Line 65:		Line 63:
	\| align="left" \| Ultimaker\|\|PVA\|\|2.85MM\|\|Natural\|\|210\|\|225\|\|210\|\|225\|\|\|\|\|\|[https://ultimaker.com/materials/pva more info]\|\|Dissolves in ordinary tap water		\| align="left" \| Ultimaker\|\|PVA\|\|2.85MM\|\|Natural\|\|210\|\|225\|\|210\|\|225\|\|\|\|\|\|[https://ultimaker.com/materials/pva more info]\|\|Dissolves in ordinary tap water
	\|}		\|}


			All temperatures are Celsius.


	[[Category:Equipment]]		[[Category:Equipment]]

24foxtrot at 03:29, 16 August 2019

2019-08-16T03:29:22Z

24foxtrot at 03:13, 16 August 2019

2019-08-16T03:13:21Z

← Older revision		Revision as of 23:29, 15 August 2019
Line 1:		Line 1:
	hackRVA has a collection of filaments from multiple vendors for our members.		hackRVA has a collection of filaments from multiple vendors for our members.

			All temperatures are Celsius.

	== * THIS PAGE IS BEING CREATED * ==		== * THIS PAGE IS BEING CREATED * ==
Line 11:		Line 12:

	{\| class="wikitable" style="text-align: center;"		{\| class="wikitable" style="text-align: center;"
	!Manufacturer!!Type!!Size!!Color!!Temp-Min~~(C)~~!!Temp-Max~~(C)~~!!BedTemp-Min~~(C)~~!!BedTemp-Max~~(C)~~!!NoHeat-OK!!Nozzle-Temp~~(C)~~!!URL!!Instructions		!Manufacturer!!Type!!Size!!Color!!Temp-Min!!Temp-Max!!BedTemp-Min!!BedTemp-Max!!NoHeat-OK!!Nozzle-Temp!!URL!!Instructions
	\|-		\|-
	\|-		\|-
	\| align="left" \| Gizmo Dorks\|\|ABS\|\|1.75MM\|\|Grey\|\|230\|\|250\|\|110\|\|110\|\|\|\|\|\|https://gizmodorks.com/abs-3d-printer-filament/\|\|		\| align="left" \| Gizmo Dorks\|\|ABS\|\|1.75MM\|\|Grey\|\|230\|\|250\|\|110\|\|110\|\|\|\|\|\|[https://gizmodorks.com/abs-3d-printer-filament/ more info]\|\|
	\|-		\|-
	\| align="left" \| Hatchbox\|\|ABS\|\|1.75MM\|\|Transparent Green\|\|210\|\|240\|\|\|\|\|\|\|\|\|\|https://www.hatchbox3d.com/products/3d-abs-1kg1-75-tgrn\|\|		\| align="left" \| Hatchbox\|\|ABS\|\|1.75MM\|\|Transparent Green\|\|210\|\|240\|\|\|\|\|\|\|\|\|\|https://www.hatchbox3d.com/products/3d-abs-1kg1-75-tgrn more info]\|\|
	\|-		\|-
	\| align="left" \| MakerBot\|\|ABS\|\|1.75MM\|\|True Blue\|\|230\|\|230\|\|105\|\|105\|\|\|\|230\|\|https://store.makerbot.com/3d-printers/replicator-materials/abs-large/#truebluehttps://store.makerbot.com/3d-printers/replicator-materials/abs-large/#trueblue\|\|Instructions portray Print temp as Nozzle temp		\| align="left" \| MakerBot\|\|ABS\|\|1.75MM\|\|True Blue\|\|230\|\|230\|\|105\|\|105\|\|\|\|230\|\|[https://store.makerbot.com/3d-printers/replicator-materials/abs-large/#truebluehttps://store.makerbot.com/3d-printers/replicator-materials/abs-large/#trueblue more info]\|\|Instructions portray Print temp as Nozzle temp
	\|-		\|-
	\| align="left" \| MakerShaper\|\|ABS\|\|1.75MM\|\|Neon Orange\|\|210\|\|245\|\|110\|\|130\|\|\|\|\|\|https://makeshaper.com/product/neon-orange-abs-1-75-mm-filament/\|\|		\| align="left" \| MakerShaper\|\|ABS\|\|1.75MM\|\|Neon Orange\|\|210\|\|245\|\|110\|\|130\|\|\|\|\|\|[https://makeshaper.com/product/neon-orange-abs-1-75-mm-filament/ more info]\|\|
	\|-		\|-
	\| align="left" \| MakeShaper\|\|ABS\|\|1.75MM\|\|Black\|\|210\|\|245\|\|110\|\|130\|\|\|\|\|\|https://makeshaper.com/product/black-abs-1-75-mm-filament/\|\|		\| align="left" \| MakeShaper\|\|ABS\|\|1.75MM\|\|Black\|\|210\|\|245\|\|110\|\|130\|\|\|\|\|\|[https://makeshaper.com/product/black-abs-1-75-mm-filament/ more info]\|\|
	\|-		\|-
	\| align="left" \| MONOPRICE\|\|ABS\|\|1.75MM\|\|Pink\|\|220\|\|260\|\|110\|\|110\|\|\|\|\|\|https://www.monoprice.com/product?c_id=306&cp_id=30601&cs_id=3060103&p_id=11777&seq=1&format=2\|\|		\| align="left" \| MONOPRICE\|\|ABS\|\|1.75MM\|\|Pink\|\|220\|\|260\|\|110\|\|110\|\|\|\|\|\|[https://www.monoprice.com/product?c_id=306&cp_id=30601&cs_id=3060103&p_id=11777&seq=1&format=2 more info]\|\|
	\|-		\|-
	\| align="left" \| MONOPRICE\|\|ABS\|\|1.75MM\|\|Flourescent Yellow\|\|220\|\|260\|\|110\|\|110\|\|\|\|\|\|https://www.monoprice.com/product?c_id=306&cp_id=30601&cs_id=3060103&p_id=11550&seq=1&format=2\|\|		\| align="left" \| MONOPRICE\|\|ABS\|\|1.75MM\|\|Flourescent Yellow\|\|220\|\|260\|\|110\|\|110\|\|\|\|\|\|[https://www.monoprice.com/product?c_id=306&cp_id=30601&cs_id=3060103&p_id=11550&seq=1&format=2 more info]\|\|
	\|-		\|-
	\| align="left" \| Polymaker\|\|PC-Plus\|\|1.75MM\|\|True Black\|\|250\|\|270\|\|90\|\|105\|\|\|\|\|\|https://us.polymaker.com/product/polylite-pc/\|\|		\| align="left" \| Polymaker\|\|PC-Plus\|\|1.75MM\|\|True Black\|\|250\|\|270\|\|90\|\|105\|\|\|\|\|\|[https://us.polymaker.com/product/polylite-pc/ more info]\|\|
	\|-		\|-
	\| align="left" \| Generic\|\|PET\|\|1.75MM\|\|Jet Black\|\|240\|\|240\|\|80\|\|100\|\|\|\|240\|\|https://www.prusa3d.com/material-guides/\|\|This is likely an ancient Prusa filament		\| align="left" \| Generic\|\|PET\|\|1.75MM\|\|Jet Black\|\|240\|\|240\|\|80\|\|100\|\|\|\|240\|\|[https://www.prusa3d.com/material-guides/ more info]\|\|This is likely an ancient Prusa filament
	\|-		\|-
	\| align="left" \| esun\|\|PETG\|\|1.75MM\|\|Solid Black\|\|230\|\|250\|\|60\|\|80\|\|Y\|\|\|\|http://www.esun3d.net/products/435.html\|\|		\| align="left" \| esun\|\|PETG\|\|1.75MM\|\|Solid Black\|\|230\|\|250\|\|60\|\|80\|\|Y\|\|\|\|[http://www.esun3d.net/products/435.html more info]\|\|
	\|-		\|-
	\| align="left" \| 3D Printed Solid\|\|PLA\|\|1.75MM\|\|Red\|\|210\|\|240\|\|\|\|\|\|\|\|\|\|http://www.3dprintedsolid.com/store/home/shop/uncategorized/pla-3d-printing-filament-1-75mm-1kg-2-2lbs-spool-made-in-the-u-s-a/\|\|		\| align="left" \| 3D Printed Solid\|\|PLA\|\|1.75MM\|\|Red\|\|210\|\|240\|\|\|\|\|\|\|\|\|\|[http://www.3dprintedsolid.com/store/home/shop/uncategorized/pla-3d-printing-filament-1-75mm-1kg-2-2lbs-spool-made-in-the-u-s-a/ more info]\|\|
	\|-		\|-
	\| align="left" \| 3D Printed Solid\|\|PLA\|\|1.75MM\|\|Blue\|\|210\|\|240\|\|\|\|\|\|\|\|\|\|http://www.3dprintedsolid.com/store/home/shop/uncategorized/pla-3d-printing-filament-1-75mm-1kg-2-2lbs-spool-made-in-the-u-s-a/\|\|		\| align="left" \| 3D Printed Solid\|\|PLA\|\|1.75MM\|\|Blue\|\|210\|\|240\|\|\|\|\|\|\|\|\|\|[http://www.3dprintedsolid.com/store/home/shop/uncategorized/pla-3d-printing-filament-1-75mm-1kg-2-2lbs-spool-made-in-the-u-s-a/ more info]\|\|
	\|-		\|-
	\| align="left" \| bq\|\|PLA\|\|1.75MM\|\|Grass Green\|\|200\|\|220\|\|\|\|\|\|\|\|\|\|https://webstatic.bq.com/Technical%20specifications%20-%20BQ%20PLA.pdf\|\|		\| align="left" \| bq\|\|PLA\|\|1.75MM\|\|Grass Green\|\|200\|\|220\|\|\|\|\|\|\|\|\|\|[https://webstatic.bq.com/Technical%20specifications%20-%20BQ%20PLA.pdf more info]\|\|
	\|-		\|-
	\| align="left" \| Generic\|\|PLA\|\|1.75MM\|\|White\|\|215\|\|215\|\|50\|\|60\|\|\|\|215\|\|https://www.prusa3d.com/material-guides/\|\|Unable to locate filament. Used Prusa material Guide		\| align="left" \| Generic\|\|PLA\|\|1.75MM\|\|White\|\|215\|\|215\|\|50\|\|60\|\|\|\|215\|\|[https://www.prusa3d.com/material-guides/ more info]\|\|Unable to locate filament. Used Prusa material Guide
	\|-		\|-
	\| align="left" \| Generic\|\|PLA\|\|1.75MM\|\|White\|\|215\|\|215\|\|50\|\|60\|\|\|\|215\|\|https://www.prusa3d.com/material-guides/\|\|Unable to locate filament. Used Prusa material Guide		\| align="left" \| Generic\|\|PLA\|\|1.75MM\|\|White\|\|215\|\|215\|\|50\|\|60\|\|\|\|215\|\|[https://www.prusa3d.com/material-guides/ more info]\|\|Unable to locate filament. Used Prusa material Guide
	\|-		\|-
	\| align="left" \| Generic\|\|PLA\|\|1.75MM\|\|Black\|\|215\|\|215\|\|50\|\|60\|\|\|\|215\|\|https://www.prusa3d.com/material-guides/\|\|Unable to locate filament. Used Prusa material Guide		\| align="left" \| Generic\|\|PLA\|\|1.75MM\|\|Black\|\|215\|\|215\|\|50\|\|60\|\|\|\|215\|\|[https://www.prusa3d.com/material-guides/ more info]\|\|Unable to locate filament. Used Prusa material Guide
	\|-		\|-
	\| align="left" \| Hatchbox\|\|PLA\|\|1.75MM\|\|Transparent Red\|\|180\|\|210\|\|\|\|\|\|Y\|\|\|\|https://www.hatchbox3d.com/products/3d-pla-1kg1-75-tred\|\|		\| align="left" \| Hatchbox\|\|PLA\|\|1.75MM\|\|Transparent Red\|\|180\|\|210\|\|\|\|\|\|Y\|\|\|\|[https://www.hatchbox3d.com/products/3d-pla-1kg1-75-tred more info]\|\|
	\|-		\|-
	\| align="left" \| MakerBot\|\|PLA\|\|1.75MM\|\|Natural\|\|150\|\|160\|\|60\|\|65\|\|\|\|215\|\|https://store.makerbot.com/3d-printers/replicator-materials/pla-large/#natural\|\|		\| align="left" \| MakerBot\|\|PLA\|\|1.75MM\|\|Natural\|\|150\|\|160\|\|60\|\|65\|\|\|\|215\|\|[https://store.makerbot.com/3d-printers/replicator-materials/pla-large/#natural more info]\|\|
	\|-		\|-
	\| align="left" \| MONOPRICE\|\|PLA\|\|1.75MM\|\|Glow In The Dark Green\|\|190\|\|210\|\|60\|\|80\|\|Y\|\|\|\|https://www.monoprice.com/product?p_id=11780\|\|		\| align="left" \| MONOPRICE\|\|PLA\|\|1.75MM\|\|Glow In The Dark Green\|\|190\|\|210\|\|60\|\|80\|\|Y\|\|\|\|[https://www.monoprice.com/product?p_id=11780 more info]\|\|
	\|-		\|-
	\| align="left" \| MONOPRICE\|\|PLA\|\|1.75MM\|\|Clear\|\|190\|\|210\|\|60\|\|80\|\|Y\|\|\|\|https://www.monoprice.com/product?c_id=306&cp_id=30601&cs_id=3060103&p_id=11551&seq=1&format=2\|\|		\| align="left" \| MONOPRICE\|\|PLA\|\|1.75MM\|\|Clear\|\|190\|\|210\|\|60\|\|80\|\|Y\|\|\|\|[https://www.monoprice.com/product?c_id=306&cp_id=30601&cs_id=3060103&p_id=11551&seq=1&format=2 more info]\|\|
	\|-		\|-
	\| align="left" \| Prusa\|\|PLA\|\|1.75MM\|\|Silver\|\|200\|\|220\|\|\|\|\|\|\|\|\|\|https://shop.prusa3d.com/en/filament/46-silver-pla-filament-1kg.html#\|\|Using specs on spool not website		\| align="left" \| Prusa\|\|PLA\|\|1.75MM\|\|Silver\|\|200\|\|220\|\|\|\|\|\|\|\|\|\|[https://shop.prusa3d.com/en/filament/46-silver-pla-filament-1kg.html# more info]\|\|Using specs on spool not website
	\|-		\|-
	\| align="left" \| colorFabb\|\|HT\|\|2.85MM\|\|Black\|\|250\|\|280\|\|110\|\|120\|\|\|\|\|\|https://colorfabb.com/ht-black\|\|		\| align="left" \| colorFabb\|\|HT\|\|2.85MM\|\|Black\|\|250\|\|280\|\|110\|\|120\|\|\|\|\|\|[https://colorfabb.com/ht-black more info]\|\|
	\|-		\|-
	\| align="left" \| colorFabb\|\|PETG\|\|2.85MM\|\|Economy Red\|\|235\|\|255\|\|70\|\|80\|\|Y\|\|\|\|https://colorfabb.com/petg-economy-red\|\|Pick CPE on Ultimaker 3		\| align="left" \| colorFabb\|\|PETG\|\|2.85MM\|\|Economy Red\|\|235\|\|255\|\|70\|\|80\|\|Y\|\|\|\|[https://colorfabb.com/petg-economy-red more info]\|\|Pick CPE on Ultimaker 3
	\|-		\|-
	\| align="left" \| colorFabb\|\|PLA/PHA\|\|2.85MM\|\|Ultra Marine Blue\|\|195\|\|220\|\|50\|\|60\|\|Y\|\|\|\|https://colorfabb.com/ultra-marine-blue\|\|Select PLA on Ultimaker 3		\| align="left" \| colorFabb\|\|PLA/PHA\|\|2.85MM\|\|Ultra Marine Blue\|\|195\|\|220\|\|50\|\|60\|\|Y\|\|\|\|[https://colorfabb.com/ultra-marine-blue more info]\|\|Select PLA on Ultimaker 3
	\|-		\|-
	\| align="left" \| Ultimaker\|\|PVA\|\|2.85MM\|\|Natural\|\|210\|\|225\|\|210\|\|225\|\|\|\|\|\|https://ultimaker.com/materials/pva\|\|Dissolves in ordinary tap water		\| align="left" \| Ultimaker\|\|PVA\|\|2.85MM\|\|Natural\|\|210\|\|225\|\|210\|\|225\|\|\|\|\|\|[https://ultimaker.com/materials/pva more info]\|\|Dissolves in ordinary tap water
	\|}		\|}


	[[Category:Equipment]]		[[Category:Equipment]]

← Older revision		Revision as of 23:13, 15 August 2019
Line 1:		Line 1:
	hackRVA has a collection of filaments from multiple vendors for our members.		hackRVA has a collection of filaments from multiple vendors for our members.


			== * THIS PAGE IS BEING CREATED * ==


	Every spool of filament has a makerspace standardized label on it with details to aid in printing.		Every spool of filament has a makerspace standardized label on it with details to aid in printing.
Line 26:		Line 30:
	\| align="left" \| Polymaker\|\|PC-Plus\|\|1.75MM\|\|True Black\|\|250\|\|270\|\|90\|\|105\|\|\|\|\|\|https://us.polymaker.com/product/polylite-pc/\|\|		\| align="left" \| Polymaker\|\|PC-Plus\|\|1.75MM\|\|True Black\|\|250\|\|270\|\|90\|\|105\|\|\|\|\|\|https://us.polymaker.com/product/polylite-pc/\|\|
	\|-		\|-
	\| align="left" \| Generic\|\|PET\|\|1.75MM\|\|Jet Black\|\|240\|\|240\|\|80\|\|100\|\|~~240~~\|\|\|\|https://www.prusa3d.com/material-guides/\|\|This is likely an ancient Prusa filament		\| align="left" \| Generic\|\|PET\|\|1.75MM\|\|Jet Black\|\|240\|\|240\|\|80\|\|100\|\|\|\|240\|\|https://www.prusa3d.com/material-guides/\|\|This is likely an ancient Prusa filament
	\|-		\|-
	\| align="left" \| esun\|\|PETG\|\|1.75MM\|\|Solid Black\|\|230\|\|250\|\|60\|\|80\|\|Y\|\|\|\|http://www.esun3d.net/products/435.html\|\|		\| align="left" \| esun\|\|PETG\|\|1.75MM\|\|Solid Black\|\|230\|\|250\|\|60\|\|80\|\|Y\|\|\|\|http://www.esun3d.net/products/435.html\|\|
	\|-		\|-
	\| align="left" \| 3D Printed Solid\|\|PLA\|\|1.75MM\|\|Red\|\|210\|\|240\|\|http://www.3dprintedsolid.com/store/home/shop/uncategorized/pla-3d-printing-filament-1-75mm-1kg-2-2lbs-spool-made-in-the-u-s-a/\|\|		\| align="left" \| 3D Printed Solid\|\|PLA\|\|1.75MM\|\|Red\|\|210\|\|240\|\|\|\|\|\|\|\|\|\|http://www.3dprintedsolid.com/store/home/shop/uncategorized/pla-3d-printing-filament-1-75mm-1kg-2-2lbs-spool-made-in-the-u-s-a/\|\|
	\|-		\|-
	\| align="left" \| 3D Printed Solid\|\|PLA\|\|1.75MM\|\|Blue\|\|210\|\|240\|\|http://www.3dprintedsolid.com/store/home/shop/uncategorized/pla-3d-printing-filament-1-75mm-1kg-2-2lbs-spool-made-in-the-u-s-a/\|\|		\| align="left" \| 3D Printed Solid\|\|PLA\|\|1.75MM\|\|Blue\|\|210\|\|240\|\|\|\|\|\|\|\|\|\|http://www.3dprintedsolid.com/store/home/shop/uncategorized/pla-3d-printing-filament-1-75mm-1kg-2-2lbs-spool-made-in-the-u-s-a/\|\|
	\|-		\|-
	\| align="left" \| bq\|\|PLA\|\|1.75MM\|\|Grass Green\|\|200\|\|220\|\|https://webstatic.bq.com/Technical%20specifications%20-%20BQ%20PLA.pdf\|\|		\| align="left" \| bq\|\|PLA\|\|1.75MM\|\|Grass Green\|\|200\|\|220\|\|\|\|\|\|\|\|\|\|https://webstatic.bq.com/Technical%20specifications%20-%20BQ%20PLA.pdf\|\|
	\|-		\|-
	\| align="left" \| Generic\|\|PLA\|\|1.75MM\|\|White\|\|215\|\|215\|\|50\|\|60\|\|215\|\|https://www.prusa3d.com/material-guides/\|\|Unable to locate filament. Used Prusa material Guide		\| align="left" \| Generic\|\|PLA\|\|1.75MM\|\|White\|\|215\|\|215\|\|50\|\|60\|\|\|\|215\|\|https://www.prusa3d.com/material-guides/\|\|Unable to locate filament. Used Prusa material Guide
	\|-		\|-
	\| align="left" \| Generic\|\|PLA\|\|1.75MM\|\|White\|\|215\|\|215\|\|50\|\|60\|\|215\|\|https://www.prusa3d.com/material-guides/\|\|Unable to locate filament. Used Prusa material Guide		\| align="left" \| Generic\|\|PLA\|\|1.75MM\|\|White\|\|215\|\|215\|\|50\|\|60\|\|\|\|215\|\|https://www.prusa3d.com/material-guides/\|\|Unable to locate filament. Used Prusa material Guide
	\|-		\|-
	\| align="left" \| Generic\|\|PLA\|\|1.75MM\|\|Black\|\|215\|\|215\|\|50\|\|60\|\|215\|\|https://www.prusa3d.com/material-guides/\|\|Unable to locate filament. Used Prusa material Guide		\| align="left" \| Generic\|\|PLA\|\|1.75MM\|\|Black\|\|215\|\|215\|\|50\|\|60\|\|\|\|215\|\|https://www.prusa3d.com/material-guides/\|\|Unable to locate filament. Used Prusa material Guide
	\|-		\|-
	\| align="left" \| Hatchbox\|\|PLA\|\|1.75MM\|\|Transparent Red\|\|180\|\|210\|\|Y\|\|https://www.hatchbox3d.com/products/3d-pla-1kg1-75-tred\|\|		\| align="left" \| Hatchbox\|\|PLA\|\|1.75MM\|\|Transparent Red\|\|180\|\|210\|\|\|\|\|\|Y\|\|\|\|https://www.hatchbox3d.com/products/3d-pla-1kg1-75-tred\|\|
	\|-		\|-
	\| align="left" \| MakerBot\|\|PLA\|\|1.75MM\|\|Natural\|\|150\|\|160\|\|60\|\|65\|\|215\|\|https://store.makerbot.com/3d-printers/replicator-materials/pla-large/#natural\|\|		\| align="left" \| MakerBot\|\|PLA\|\|1.75MM\|\|Natural\|\|150\|\|160\|\|60\|\|65\|\|\|\|215\|\|https://store.makerbot.com/3d-printers/replicator-materials/pla-large/#natural\|\|
	\|-		\|-
	\| align="left" \| MONOPRICE\|\|PLA\|\|1.75MM\|\|Glow In The Dark Green\|\|190\|\|210\|\|60\|\|80\|\|Y\|\|https://www.monoprice.com/product?p_id=11780\|\|		\| align="left" \| MONOPRICE\|\|PLA\|\|1.75MM\|\|Glow In The Dark Green\|\|190\|\|210\|\|60\|\|80\|\|Y\|\|\|\|https://www.monoprice.com/product?p_id=11780\|\|
	\|-		\|-
	\| align="left" \| MONOPRICE\|\|PLA\|\|1.75MM\|\|Clear\|\|190\|\|210\|\|60\|\|80\|\|Y\|\|https://www.monoprice.com/product?c_id=306&cp_id=30601&cs_id=3060103&p_id=11551&seq=1&format=2\|\|		\| align="left" \| MONOPRICE\|\|PLA\|\|1.75MM\|\|Clear\|\|190\|\|210\|\|60\|\|80\|\|Y\|\|\|\|https://www.monoprice.com/product?c_id=306&cp_id=30601&cs_id=3060103&p_id=11551&seq=1&format=2\|\|
	\|-		\|-
	\| align="left" \| Prusa\|\|PLA\|\|1.75MM\|\|Silver\|\|200\|\|220\|\|https://shop.prusa3d.com/en/filament/46-silver-pla-filament-1kg.html#\|\|Using specs on spool not website		\| align="left" \| Prusa\|\|PLA\|\|1.75MM\|\|Silver\|\|200\|\|220\|\|\|\|\|\|\|\|\|\|https://shop.prusa3d.com/en/filament/46-silver-pla-filament-1kg.html#\|\|Using specs on spool not website
	\|-		\|-
	\| align="left" \| colorFabb\|\|HT\|\|2.85MM\|\|Black\|\|250\|\|280\|\|110\|\|120\|\|https://colorfabb.com/ht-black\|\|		\| align="left" \| colorFabb\|\|HT\|\|2.85MM\|\|Black\|\|250\|\|280\|\|110\|\|120\|\|\|\|\|\|https://colorfabb.com/ht-black\|\|
	\|-		\|-
	\| align="left" \| colorFabb\|\|PETG\|\|2.85MM\|\|Economy Red\|\|235\|\|255\|\|70\|\|80\|\|Y\|\|https://colorfabb.com/petg-economy-red\|\|Pick CPE on Ultimaker 3		\| align="left" \| colorFabb\|\|PETG\|\|2.85MM\|\|Economy Red\|\|235\|\|255\|\|70\|\|80\|\|Y\|\|\|\|https://colorfabb.com/petg-economy-red\|\|Pick CPE on Ultimaker 3
	\|-		\|-
	\| align="left" \| colorFabb\|\|PLA/PHA\|\|2.85MM\|\|Ultra Marine Blue\|\|195\|\|220\|\|50\|\|60\|\|Y\|\|https://colorfabb.com/ultra-marine-blue\|\|Select PLA on Ultimaker 3		\| align="left" \| colorFabb\|\|PLA/PHA\|\|2.85MM\|\|Ultra Marine Blue\|\|195\|\|220\|\|50\|\|60\|\|Y\|\|\|\|https://colorfabb.com/ultra-marine-blue\|\|Select PLA on Ultimaker 3
	\|-		\|-
	\| align="left" \| Ultimaker\|\|PVA\|\|2.85MM\|\|Natural\|\|210\|\|225\|\|210\|\|225\|\|https://ultimaker.com/materials/pva\|\|Dissolves in ordinary tap water		\| align="left" \| Ultimaker\|\|PVA\|\|2.85MM\|\|Natural\|\|210\|\|225\|\|210\|\|225\|\|\|\|\|\|https://ultimaker.com/materials/pva\|\|Dissolves in ordinary tap water
	\|}		\|}


	[[Category:Equipment]]		[[Category:Equipment]]

Filament - Revision history

Megan at 05:12, 5 December 2024

Megan at 05:12, 5 December 2024

24foxtrot at 22:41, 17 August 2019

24foxtrot: 24foxtrot moved page Filaments to Filament

24foxtrot at 22:38, 17 August 2019

24foxtrot: /* *** THIS PAGE IS BEING CREATED *** */

24foxtrot at 04:42, 16 August 2019

24foxtrot at 04:20, 16 August 2019

24foxtrot at 03:29, 16 August 2019

24foxtrot at 03:13, 16 August 2019

24foxtrot: /* * THIS PAGE IS BEING CREATED * */