3D Printing - Revision history

Rterrell: Removed the Mars, can be added back later if we ever find room for both. Updated Saturn 4 Ultra firmware version, serial number, link to vendor website.

2026-03-22T18:05:55Z

Removed the Mars, can be added back later if we ever find room for both. Updated Saturn 4 Ultra firmware version, serial number, link to vendor website.

Show changes

Megan at 21:56, 2 December 2025

2025-12-02T21:56:58Z

← Older revision		Revision as of 17:56, 2 December 2025
Line 41:		Line 41:
	\|\| Yes (Max 120°C)<br> Smooth, Textured		\|\| Yes (Max 120°C)<br> Smooth, Textured
	\|\| Yes (Max 120°C)<br> Smooth, Textured, Satin		\|\| Yes (Max 120°C)<br> Smooth, Textured, Satin
	\|\|		\|\| No
	\|\|		\|\| No
	\|-		\|-
	\| align="left" \| Filament Accepted		\| align="left" \| Filament Accepted

Megan at 21:56, 2 December 2025

2025-12-02T21:56:12Z

← Older revision		Revision as of 17:56, 2 December 2025
Line 34:		Line 34:
	\|\|360 × 360 × 360 mm		\|\|360 × 360 × 360 mm
	\|\|120 x 60 x 155 mm		\|\|120 x 60 x 155 mm
	\|\|		\|\|219 x 123 x 220 mm
	\|-		\|-
	\| align="left" \| Heated Build Platform		\| align="left" \| Heated Build Platform
Line 65:		Line 65:
	\|\| 50 microns		\|\| 50 microns
	\|\| 50 microns		\|\| 50 microns
	\|\| ~~25 microns~~		\|\| 0.047mm (2560*1440)
	\|\|		\|\| 19 x 24μm (11520*5120)
	\|-		\|-
	\| align="left" \| Print Layer Thickness		\| align="left" \| Print Layer Thickness
Line 73:		Line 73:
	\|\| 0.05 - 0.3 mm		\|\| 0.05 - 0.3 mm
	\|\| 0.05 - 0.3 mm		\|\| 0.05 - 0.3 mm
	\|\|		\|\| 0.01 - 0.2mm
	\|\|		\|\| 0.01 - 0.2mm
	\|-		\|-
	\| align="left" \| Printing Temperature		\| align="left" \| Printing Temperature

Megan at 10:18, 1 December 2025

2025-12-01T10:18:37Z

← Older revision		Revision as of 06:18, 1 December 2025
Line 90:		Line 90:
	\|\| Yes		\|\| Yes
	\|\| Yes		\|\| Yes
	\|\|		\|\| Yes
	\|-		\|-
	\| align="left" \| Web Site		\| align="left" \| Web Site
Line 130:		Line 130:
	\|\| 10381-09424416<br>42900724/10		\|\| 10381-09424416<br>42900724/10
	\|\| MP0220200401		\|\| MP0220200401
	\|\|		\|\| S4U255N0371
	\|-		\|-
	\| align="left" \| Software		\| align="left" \| Software
Line 138:		Line 138:
	\|\| PrusaSlicer		\|\| PrusaSlicer
	\|\| Lychee Slicer		\|\| Lychee Slicer
	\|\|		\|\| Chitubox, Lychee Slicer
	\|}		\|}

Megan at 01:58, 1 December 2025

2025-12-01T01:58:37Z

← Older revision		Revision as of 21:58, 30 November 2025
Line 106:		Line 106:
	\|\| [https://help.prusa3d.com/product/xl Support]		\|\| [https://help.prusa3d.com/product/xl Support]
	\|\| [https://wiki.hackrva.org/images/8/8e/Mars_Pro_Manual.pdf Manual]		\|\| [https://wiki.hackrva.org/images/8/8e/Mars_Pro_Manual.pdf Manual]
	\|\|		\|\| [https://wiki.hackrva.org/images/0/00/01-User-Manual-For-Saturn-4-Ultra-English-Version.pdf Manual]
	\|-		\|-
	\|align="left \| hack.rva User Guide		\|align="left \| hack.rva User Guide

Megan at 01:57, 1 December 2025

2025-12-01T01:57:04Z

← Older revision		Revision as of 21:57, 30 November 2025
Line 10:		Line 10:
	! Original Prusa XL		! Original Prusa XL
	! Elegoo Mars Pro		! Elegoo Mars Pro
			! Elegoo Saturn 4 Ultra
	\|-		\|-
	\| align="left" \|		\| align="left" \|
Line 17:		Line 18:
	\|style="vertical-align:bottom"\|[[File:PrusaXL5.jpg\|x150px\|link=]]		\|style="vertical-align:bottom"\|[[File:PrusaXL5.jpg\|x150px\|link=]]
	\|style="vertical-align:bottom"\|[[File:MarsPro.jpg\|x150px\|link=]]		\|style="vertical-align:bottom"\|[[File:MarsPro.jpg\|x150px\|link=]]
			\|style="vertical-align:bottom"\|[[File:Saturn-4-Ultra-1.jpg\|x150px\|link=]]
	\|-		\|-
	\| align="left" \| Number of Print Heads		\| align="left" \| Number of Print Heads
Line 24:		Line 26:
	\|\| 5		\|\| 5
	\|\|		\|\|
			\|\|
	\|-		\|-
	\| align="left" \| Build Volume		\| align="left" \| Build Volume
Line 31:		Line 34:
	\|\|360 × 360 × 360 mm		\|\|360 × 360 × 360 mm
	\|\|120 x 60 x 155 mm		\|\|120 x 60 x 155 mm
			\|\|
	\|-		\|-
	\| align="left" \| Heated Build Platform		\| align="left" \| Heated Build Platform
Line 37:		Line 41:
	\|\| Yes (Max 120°C)<br> Smooth, Textured		\|\| Yes (Max 120°C)<br> Smooth, Textured
	\|\| Yes (Max 120°C)<br> Smooth, Textured, Satin		\|\| Yes (Max 120°C)<br> Smooth, Textured, Satin
			\|\|
	\|\|		\|\|
	\|-		\|-
Line 44:		Line 49:
	\|\| 1.75mm		\|\| 1.75mm
	\|\| 1.75mm		\|\| 1.75mm
			\|\| Photopolymer Resin
	\|\| Photopolymer Resin		\|\| Photopolymer Resin
	\|-		\|-
Line 51:		Line 57:
	\|\| 0.25-0.8mm <br>(0.4HF brass installed)		\|\| 0.25-0.8mm <br>(0.4HF brass installed)
	\|\| 0.25-0.8mm <br>(0.4HF brass installed)		\|\| 0.25-0.8mm <br>(0.4HF brass installed)
			\|\|
	\|\|		\|\|
	\|-		\|-
Line 59:		Line 66:
	\|\| 50 microns		\|\| 50 microns
	\|\| 25 microns		\|\| 25 microns
			\|\|
	\|-		\|-
	\| align="left" \| Print Layer Thickness		\| align="left" \| Print Layer Thickness
Line 66:		Line 74:
	\|\| 0.05 - 0.3 mm		\|\| 0.05 - 0.3 mm
	\|\|		\|\|
			\|\|
	\|-		\|-
	\| align="left" \| Printing Temperature		\| align="left" \| Printing Temperature
Line 73:		Line 82:
	\|\| Max 290°C		\|\| Max 290°C
	\|\|		\|\|
			\|\|
	\|-		\|-
	\| align="left" \| Enclosed		\| align="left" \| Enclosed
Line 80:		Line 90:
	\|\| Yes		\|\| Yes
	\|\| Yes		\|\| Yes
			\|\|
	\|-		\|-
	\| align="left" \| Web Site		\| align="left" \| Web Site
Line 86:		Line 97:
	\|\| [https://help.prusa3d.com/tag/mk4s Original Prusa MK4S]		\|\| [https://help.prusa3d.com/tag/mk4s Original Prusa MK4S]
	\|\| [https://www.prusa3d.com/product/original-prusa-xl-semi-assembled-single-toolhead-3d-printer/ Original Prusa XL]		\|\| [https://www.prusa3d.com/product/original-prusa-xl-semi-assembled-single-toolhead-3d-printer/ Original Prusa XL]
	\|\| [https://www.elegoo.com/pages/3d-printing-user-support Elegoo Mars Pro]		\|\| [https://www.elegoo.com/pages/3d-printing-user-support Elegoo Mars Pro]
			\|\|
	\|-		\|-
	\| align="left" \| User Manual		\| align="left" \| User Manual
Line 94:		Line 106:
	\|\| [https://help.prusa3d.com/product/xl Support]		\|\| [https://help.prusa3d.com/product/xl Support]
	\|\| [https://wiki.hackrva.org/images/8/8e/Mars_Pro_Manual.pdf Manual]		\|\| [https://wiki.hackrva.org/images/8/8e/Mars_Pro_Manual.pdf Manual]
			\|\|
	\|-		\|-
	\|align="left \| hack.rva User Guide		\|align="left \| hack.rva User Guide
Line 100:		Line 113:
	\|[https://docs.google.com/document/d/1KqlVb1p83_EUG3c8qjVl1lBDOOcALfFgsBXz34Z77lQ Prusa Printers User Guide]		\|[https://docs.google.com/document/d/1KqlVb1p83_EUG3c8qjVl1lBDOOcALfFgsBXz34Z77lQ Prusa Printers User Guide]
	\|[https://docs.google.com/document/d/1KqlVb1p83_EUG3c8qjVl1lBDOOcALfFgsBXz34Z77lQ Prusa Printers User Guide]		\|[https://docs.google.com/document/d/1KqlVb1p83_EUG3c8qjVl1lBDOOcALfFgsBXz34Z77lQ Prusa Printers User Guide]
			\|[[Elegoo Mars Pro User Guide]]
	\|[[Elegoo Mars Pro User Guide]]		\|[[Elegoo Mars Pro User Guide]]
	\|-		\|-
Line 107:		Line 121:
	\|\| 6.2.4		\|\| 6.2.4
	\|\| 6.2.4		\|\| 6.2.4
			\|\|
	\|\|		\|\|
	\|-		\|-
Line 115:		Line 130:
	\|\| 10381-09424416<br>42900724/10		\|\| 10381-09424416<br>42900724/10
	\|\| MP0220200401		\|\| MP0220200401
			\|\|
	\|-		\|-
	\| align="left" \| Software		\| align="left" \| Software
Line 121:		Line 137:
	\|\| PrusaSlicer		\|\| PrusaSlicer
	\|\| PrusaSlicer		\|\| PrusaSlicer
	\|\| Lychee Slicer		\|\| Lychee Slicer
			\|\|
	\|}		\|}

Megan at 20:43, 5 August 2025

2025-08-05T20:43:45Z

← Older revision		Revision as of 16:43, 5 August 2025
Line 121:		Line 121:
	\|\| PrusaSlicer		\|\| PrusaSlicer
	\|\| PrusaSlicer		\|\| PrusaSlicer
	\|\| ~~Chitubox/~~ Lychee Slicer		\|\| Lychee Slicer
	\|}		\|}

Megan at 20:43, 5 August 2025

2025-08-05T20:43:06Z

← Older revision		Revision as of 16:43, 5 August 2025
Line 15:		Line 15:
	\|style="vertical-align:bottom"\|[[File:mk4.jpg\|x150px\|link=]]		\|style="vertical-align:bottom"\|[[File:mk4.jpg\|x150px\|link=]]
	\|style="vertical-align:bottom"\|[[File:mk4.jpg\|x150px\|link=]]		\|style="vertical-align:bottom"\|[[File:mk4.jpg\|x150px\|link=]]
	\|style="vertical-align:bottom"\|[[File:PrusaXL5.jpg\|x150px]]		\|style="vertical-align:bottom"\|[[File:PrusaXL5.jpg\|x150px\|link=]]
	\|style="vertical-align:bottom"\|[[File:MarsPro.jpg\|x150px\|link=]]		\|style="vertical-align:bottom"\|[[File:MarsPro.jpg\|x150px\|link=]]
	\|-		\|-

Megan at 20:39, 5 August 2025

2025-08-05T20:39:00Z

← Older revision		Revision as of 16:39, 5 August 2025
Line 15:		Line 15:
	\|style="vertical-align:bottom"\|[[File:mk4.jpg\|x150px\|link=]]		\|style="vertical-align:bottom"\|[[File:mk4.jpg\|x150px\|link=]]
	\|style="vertical-align:bottom"\|[[File:mk4.jpg\|x150px\|link=]]		\|style="vertical-align:bottom"\|[[File:mk4.jpg\|x150px\|link=]]
	\|style="vertical-align:bottom"\|[[File:~~02f30785-5d91-47b5-8fa1-988c6f20cbd6~~.jpg\|~~frameless\|189x189px~~]]		\|style="vertical-align:bottom"\|[[File:PrusaXL5.jpg\|x150px]]
	\|style="vertical-align:bottom"\|[[File:MarsPro.jpg\|x150px\|link=]]		\|style="vertical-align:bottom"\|[[File:MarsPro.jpg\|x150px\|link=]]
	\|-		\|-

Lukel99: Added Prusa User Guides

2025-08-04T18:54:02Z

Added Prusa User Guides

← Older revision		Revision as of 14:54, 4 August 2025
Line 95:		Line 95:
	\|\| [https://wiki.hackrva.org/images/8/8e/Mars_Pro_Manual.pdf Manual]		\|\| [https://wiki.hackrva.org/images/8/8e/Mars_Pro_Manual.pdf Manual]
	\|-		\|-
	\|hack.rva User Guide		\|align="left \| hack.rva User Guide
	\|		\|[https://docs.google.com/document/d/1KqlVb1p83_EUG3c8qjVl1lBDOOcALfFgsBXz34Z77lQ Prusa Printers User Guide]
	\|		\|[https://docs.google.com/document/d/1KqlVb1p83_EUG3c8qjVl1lBDOOcALfFgsBXz34Z77lQ Prusa Printers User Guide]
	\|		\|[https://docs.google.com/document/d/1KqlVb1p83_EUG3c8qjVl1lBDOOcALfFgsBXz34Z77lQ Prusa Printers User Guide]
	\|		\|[https://docs.google.com/document/d/1KqlVb1p83_EUG3c8qjVl1lBDOOcALfFgsBXz34Z77lQ Prusa Printers User Guide]
	\|[[Elegoo Mars Pro User Guide]]		\|[[Elegoo Mars Pro User Guide]]
	\|-		\|-

← Older revision		Revision as of 17:56, 2 December 2025
Line 41:		Line 41:
	\|\| Yes (Max 120°C)<br> Smooth, Textured		\|\| Yes (Max 120°C)<br> Smooth, Textured
	\|\| Yes (Max 120°C)<br> Smooth, Textured, Satin		\|\| Yes (Max 120°C)<br> Smooth, Textured, Satin
	\|\|		\|\| No
	\|\|		\|\| No
	\|-		\|-
	\| align="left" \| Filament Accepted		\| align="left" \| Filament Accepted

← Older revision		Revision as of 17:56, 2 December 2025
Line 34:		Line 34:
	\|\|360 × 360 × 360 mm		\|\|360 × 360 × 360 mm
	\|\|120 x 60 x 155 mm		\|\|120 x 60 x 155 mm
	\|\|		\|\|219 x 123 x 220 mm
	\|-		\|-
	\| align="left" \| Heated Build Platform		\| align="left" \| Heated Build Platform
Line 65:		Line 65:
	\|\| 50 microns		\|\| 50 microns
	\|\| 50 microns		\|\| 50 microns
	\|\| ~~25 microns~~		\|\| 0.047mm (2560*1440)
	\|\|		\|\| 19 x 24μm (11520*5120)
	\|-		\|-
	\| align="left" \| Print Layer Thickness		\| align="left" \| Print Layer Thickness
Line 73:		Line 73:
	\|\| 0.05 - 0.3 mm		\|\| 0.05 - 0.3 mm
	\|\| 0.05 - 0.3 mm		\|\| 0.05 - 0.3 mm
	\|\|		\|\| 0.01 - 0.2mm
	\|\|		\|\| 0.01 - 0.2mm
	\|-		\|-
	\| align="left" \| Printing Temperature		\| align="left" \| Printing Temperature

← Older revision		Revision as of 06:18, 1 December 2025
Line 90:		Line 90:
	\|\| Yes		\|\| Yes
	\|\| Yes		\|\| Yes
	\|\|		\|\| Yes
	\|-		\|-
	\| align="left" \| Web Site		\| align="left" \| Web Site
Line 130:		Line 130:
	\|\| 10381-09424416<br>42900724/10		\|\| 10381-09424416<br>42900724/10
	\|\| MP0220200401		\|\| MP0220200401
	\|\|		\|\| S4U255N0371
	\|-		\|-
	\| align="left" \| Software		\| align="left" \| Software
Line 138:		Line 138:
	\|\| PrusaSlicer		\|\| PrusaSlicer
	\|\| Lychee Slicer		\|\| Lychee Slicer
	\|\|		\|\| Chitubox, Lychee Slicer
	\|}		\|}

← Older revision		Revision as of 21:58, 30 November 2025
Line 106:		Line 106:
	\|\| [https://help.prusa3d.com/product/xl Support]		\|\| [https://help.prusa3d.com/product/xl Support]
	\|\| [https://wiki.hackrva.org/images/8/8e/Mars_Pro_Manual.pdf Manual]		\|\| [https://wiki.hackrva.org/images/8/8e/Mars_Pro_Manual.pdf Manual]
	\|\|		\|\| [https://wiki.hackrva.org/images/0/00/01-User-Manual-For-Saturn-4-Ultra-English-Version.pdf Manual]
	\|-		\|-
	\|align="left \| hack.rva User Guide		\|align="left \| hack.rva User Guide

← Older revision		Revision as of 21:57, 30 November 2025
Line 10:		Line 10:
	! Original Prusa XL		! Original Prusa XL
	! Elegoo Mars Pro		! Elegoo Mars Pro
			! Elegoo Saturn 4 Ultra
	\|-		\|-
	\| align="left" \|		\| align="left" \|
Line 17:		Line 18:
	\|style="vertical-align:bottom"\|[[File:PrusaXL5.jpg\|x150px\|link=]]		\|style="vertical-align:bottom"\|[[File:PrusaXL5.jpg\|x150px\|link=]]
	\|style="vertical-align:bottom"\|[[File:MarsPro.jpg\|x150px\|link=]]		\|style="vertical-align:bottom"\|[[File:MarsPro.jpg\|x150px\|link=]]
			\|style="vertical-align:bottom"\|[[File:Saturn-4-Ultra-1.jpg\|x150px\|link=]]
	\|-		\|-
	\| align="left" \| Number of Print Heads		\| align="left" \| Number of Print Heads
Line 24:		Line 26:
	\|\| 5		\|\| 5
	\|\|		\|\|
			\|\|
	\|-		\|-
	\| align="left" \| Build Volume		\| align="left" \| Build Volume
Line 31:		Line 34:
	\|\|360 × 360 × 360 mm		\|\|360 × 360 × 360 mm
	\|\|120 x 60 x 155 mm		\|\|120 x 60 x 155 mm
			\|\|
	\|-		\|-
	\| align="left" \| Heated Build Platform		\| align="left" \| Heated Build Platform
Line 37:		Line 41:
	\|\| Yes (Max 120°C)<br> Smooth, Textured		\|\| Yes (Max 120°C)<br> Smooth, Textured
	\|\| Yes (Max 120°C)<br> Smooth, Textured, Satin		\|\| Yes (Max 120°C)<br> Smooth, Textured, Satin
			\|\|
	\|\|		\|\|
	\|-		\|-
Line 44:		Line 49:
	\|\| 1.75mm		\|\| 1.75mm
	\|\| 1.75mm		\|\| 1.75mm
			\|\| Photopolymer Resin
	\|\| Photopolymer Resin		\|\| Photopolymer Resin
	\|-		\|-
Line 51:		Line 57:
	\|\| 0.25-0.8mm <br>(0.4HF brass installed)		\|\| 0.25-0.8mm <br>(0.4HF brass installed)
	\|\| 0.25-0.8mm <br>(0.4HF brass installed)		\|\| 0.25-0.8mm <br>(0.4HF brass installed)
			\|\|
	\|\|		\|\|
	\|-		\|-
Line 59:		Line 66:
	\|\| 50 microns		\|\| 50 microns
	\|\| 25 microns		\|\| 25 microns
			\|\|
	\|-		\|-
	\| align="left" \| Print Layer Thickness		\| align="left" \| Print Layer Thickness
Line 66:		Line 74:
	\|\| 0.05 - 0.3 mm		\|\| 0.05 - 0.3 mm
	\|\|		\|\|
			\|\|
	\|-		\|-
	\| align="left" \| Printing Temperature		\| align="left" \| Printing Temperature
Line 73:		Line 82:
	\|\| Max 290°C		\|\| Max 290°C
	\|\|		\|\|
			\|\|
	\|-		\|-
	\| align="left" \| Enclosed		\| align="left" \| Enclosed
Line 80:		Line 90:
	\|\| Yes		\|\| Yes
	\|\| Yes		\|\| Yes
			\|\|
	\|-		\|-
	\| align="left" \| Web Site		\| align="left" \| Web Site
Line 86:		Line 97:
	\|\| [https://help.prusa3d.com/tag/mk4s Original Prusa MK4S]		\|\| [https://help.prusa3d.com/tag/mk4s Original Prusa MK4S]
	\|\| [https://www.prusa3d.com/product/original-prusa-xl-semi-assembled-single-toolhead-3d-printer/ Original Prusa XL]		\|\| [https://www.prusa3d.com/product/original-prusa-xl-semi-assembled-single-toolhead-3d-printer/ Original Prusa XL]
	\|\| [https://www.elegoo.com/pages/3d-printing-user-support Elegoo Mars Pro]		\|\| [https://www.elegoo.com/pages/3d-printing-user-support Elegoo Mars Pro]
			\|\|
	\|-		\|-
	\| align="left" \| User Manual		\| align="left" \| User Manual
Line 94:		Line 106:
	\|\| [https://help.prusa3d.com/product/xl Support]		\|\| [https://help.prusa3d.com/product/xl Support]
	\|\| [https://wiki.hackrva.org/images/8/8e/Mars_Pro_Manual.pdf Manual]		\|\| [https://wiki.hackrva.org/images/8/8e/Mars_Pro_Manual.pdf Manual]
			\|\|
	\|-		\|-
	\|align="left \| hack.rva User Guide		\|align="left \| hack.rva User Guide
Line 100:		Line 113:
	\|[https://docs.google.com/document/d/1KqlVb1p83_EUG3c8qjVl1lBDOOcALfFgsBXz34Z77lQ Prusa Printers User Guide]		\|[https://docs.google.com/document/d/1KqlVb1p83_EUG3c8qjVl1lBDOOcALfFgsBXz34Z77lQ Prusa Printers User Guide]
	\|[https://docs.google.com/document/d/1KqlVb1p83_EUG3c8qjVl1lBDOOcALfFgsBXz34Z77lQ Prusa Printers User Guide]		\|[https://docs.google.com/document/d/1KqlVb1p83_EUG3c8qjVl1lBDOOcALfFgsBXz34Z77lQ Prusa Printers User Guide]
			\|[[Elegoo Mars Pro User Guide]]
	\|[[Elegoo Mars Pro User Guide]]		\|[[Elegoo Mars Pro User Guide]]
	\|-		\|-
Line 107:		Line 121:
	\|\| 6.2.4		\|\| 6.2.4
	\|\| 6.2.4		\|\| 6.2.4
			\|\|
	\|\|		\|\|
	\|-		\|-
Line 115:		Line 130:
	\|\| 10381-09424416<br>42900724/10		\|\| 10381-09424416<br>42900724/10
	\|\| MP0220200401		\|\| MP0220200401
			\|\|
	\|-		\|-
	\| align="left" \| Software		\| align="left" \| Software
Line 121:		Line 137:
	\|\| PrusaSlicer		\|\| PrusaSlicer
	\|\| PrusaSlicer		\|\| PrusaSlicer
	\|\| Lychee Slicer		\|\| Lychee Slicer
			\|\|
	\|}		\|}